Motorola XTS 3000 Manual Do Utilizador

After you have turned your radio on and selected the desired zone and 
channel, you can receive (listen) or transmit (send) communications as 
follows:

1a. Listen until 

you hear a 
transmission.

2.

Adjust the Volume Control Knob for a 
comfortable listening level.

3.

To transmit, press and hold the PTT Switch 
and (with your mouth 2 to 3 inches away 
from the radio) speak clearly into the microphone. The LED will 
continuously light red while the radio is transmitting. When you have 
finished talking (transmitting), release the PTT Switch to listen (receive). 

If you try to transmit on a 
channel that is programmed 
for receive only, an invalid 
tone will sound until you 
release the PTT Switch.

•

If the channel on which you are transmitting is 
programmed to receive Private-Line® (PL), ensure that 
the channel is not in use by momentarily pressing the 
Monitor Button (if programmed, see page 2) to listen for 
activity. To put the radio in permanent monitor 
operation (squelch defeat), press and hold the Monitor 
Button for five seconds (time programmable through 
radio service software). To return the radio to its original squelch state, tap 
the Monitor Button again or press the PTT Switch.

1b. Press the Volume Set 

Button (if programmed, 
see page 2) to hear the 
volume set tone.

1c. Press the Monitor 

Button (if programmed, 
see page 2) to listen for 
activity. See notes below.

Model I Book  Page 13  Wednesday, August 14, 1996  8:51 AM