Motorola XTS 3000 Manual Do Utilizador

When a talkgroup call is placed in a SmartZone™ system and the system is not 
able to obtain voice channels at all necessary sites, a busy tone will be generated. 
If so programmed in the zone manager and through the radio service software, 
you may override this busy by performing the following steps:

1.

Press the PTT Switch; a busy indication is received.

2.

Release the PTT Switch.

3.

Press and hold the PTT Switch a second time. The busy tones are heard 
again. After a few seconds, a busy-override chirp will be generated (if so 
programmed), and the radio will send in a busy-override request.

4.

The talkgroup call will be placed at all sites that have voice channel 
resources available. Other sites will be added to the call as channels 
become available. Note: Realize that not all members of the talkgroup 
will be able to hear a call when a busy override is requested.

The dispatcher-interrupt feature allows the dispatcher to interrupt your radio 
and place you in a Private Conversation call with the dispatcher.

1.

When your radio receives a dispatcher-interrupt call, you will hear a repeating 
sequence of four, short, medium-pitched tones until you answer the call. The 
green LED will also flash to announce that a call is being received.

2.

Press the PTT Switch and converse in the normal manner with the dispatcher.

3.

When you are finished with your conversation, hang up by pressing the 
Call Response Button.

If a trunking system experiences a complete failure, the radio will revert to 
failsoft operation and automatically switch to its failsoft channel. During 
failsoft, the trunking repeaters will transmit a medium-pitched tone every 10 
seconds. When the trunking system returns to normal operation, your radio 
will automatically leave the failsoft operation and return to trunked operation.

Model I Book  Page 31  Wednesday, August 14, 1996  8:51 AM