Invacare XLT Jr. Manual Do Utilizador

Página de 76
SECTION 8—SERVICE PROCEDURES
59
Replacing Back Upholstery
 WARNING
Upholstery MUST be inspected before each use. Exposure to moisture (i.e. - wet 
weather or puddles) will damage fastening straps/flaps/strips. DO NOT operate 
handcycle if upholstery is wet or damaged, otherwise severe injury may occur.
Replacing Wide Back Upholstery
NOTE: For this procedure, refer to 
FIGURE 8.12.
1. Unlatch the two fastening flaps that 
secure the bottom of existing back 
upholstery to the back canes.
2. Unlatch the top of the existing back 
upholstery.
3. Lift up on the existing back upholstery 
and remove from the handcycle.
4. Install the new back upholstery onto 
the handcycle.
5. Securely latch the fastening flaps on the 
bottom of the new back upholstery to 
the back canes.
FIGURE 8.12   Replacing Wide Back 
Replacing Narrow Back 
Upholstery
NOTE: For this procedure, refer to 
FIGURE 8.13.
NOTE: Pull the back cushion off the back 
frame.
1. Align the fastening strips on the back 
frame with the fastening strips on the 
new back cushion.
1. Press the back cushion firmly against 
the back frame to secure.
FIGURE 8.13   Replacing Narrow Back 
Fastening 
Flap
Back Upholstery
Fastening 
Flap
Back Cane
Back Cushion
Back 
Frame
Fastening 
Strips
Fixed Seat 
Narrow Back
Adjustable Seat 
Narrow Back
Back 
Frame
Fastening 
Strips