Invacare TDX SI Manual Do Utilizador
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS
25
Transferring To and From Other Seats
WARNING
ALWAYS turn the wheelchair power OFF and engage the motor locks/clutches to
prevent the wheels from moving before attempting to transfer in or out of the
wheelchair. Also make sure every precaution is taken to reduce the gap distance.
Align both casters parallel with the object you are transferring onto.
CAUTION
When transferring, position yourself as far back as possible in the seat. This will
prevent broken screws, damaged upholstery and the possibility of the wheelchair
tipping forward.
NOTE: For this procedure, refer to FIGURE 3.5.
NOTE: Adequate mobility and upper body strength is required to perform this activity
independently.
independently.
1. Position the wheelchair as close as
possible along side the seat to which
you are transferring, with the casters
aligned parallel with the object.
you are transferring, with the casters
aligned parallel with the object.
2. Engage motor locks. Refer to
3. Shift body weight into seat with
transfer.
NOTE: During independent transfer, little or
no seat platform will be beneath you. Use a
transfer board if at all possible.
no seat platform will be beneath you. Use a
transfer board if at all possible.
FIGURE 3.5 Transferring To and From
Minimize Gap Distance