Yamaha RX-V2500 Manual Do Utilizador

■

Plug the power cable into the AC inlet after all other 
connections are complete, then plug the power cable to an 
AC wall outlet.

Do not use other AC power cables. Use the one provided. 
Use of other power cables may result in fire hazard or 
electrical shock.

■

U.K. and Australia models..................................... 1 outlet
Korea model............................................................... None
Other models......................................................... 2 outlets
Use these outlets to connect the power cables from your 
other components to this unit. Power to the AC 
OUTLET(S) is controlled by this unit’s STANDBY/ON 
(or SYSTEM POWER and STANDBY). These outlets 
will supply power to any connected component whenever 
this unit is turned on. The maximum power (total power 
consumption of components) that can be connected to the 
AC OUTLET(S) is:
Asia and General models ..........................................  50 W
Other models ........................................................... 100 W

■

The VOLTAGE SELECTOR on the rear panel of this unit 
must be set for your local main voltage BEFORE plugging 
into the AC main supply. Voltages are:
General model....... AC 110/120/220/230–240 V, 50/60 Hz
Asia model ........................... AC 220/230–240V, 50/60 Hz

■

The memory back-up circuit prevents the stored data from 
being lost even if this unit is in the standby mode. 
However if the power cable is disconnected from the AC 
wall outlet, or the power supply is cut for more than one 
week, the stored data will be lost.