Yamaha RX-V2500 Manual Do Utilizador

Use this feature to reassign digital input/outputs, select the 
input signal, rename the inputs, or adjust the level of the 
signal input to each jack.

h

h

■

You can assign the digital audio input/output and 
component video jacks to other components if this unit’s 
initial settings do not correspond to your needs. Change 
the following parameters to reassign the jacks and 
effectively connect more components.
Once the jacks are reassigned, you can select the 
corresponding component using INPUT SELECTOR on 
the front panel or the input selector buttons on the remote 
control.
Input Select > input source (DVD, etc.) > 
I/O Assignment >

Example 1:
To assign the COAXIAL 7 (CD) jack to the DVD input.
1) Select Input Select, then select DVD.
2) Select I/O Assignment > Coaxial Input, then select 

7 CD.

Example 2:
To clear a jack assignment.
1) Select Input Select, then select the input source (DVD, 

etc.).

2) Select I/O Assignment, then select the jack assignment 

(Optical Output, Optical Input, Coaxial Input or 
Component Video).

3) Select NONE, then press ENTER to clear the 

assignment.

y
This menu item is also available in the front panel display system 
options menu (see page 85).

• You cannot select a specific item more than once for the same 

type of jack.

• When you connect a component to both the COAXIAL and 

OPTICAL jacks, priority is given to the input signals from the 
COAXIAL jack.

■

Use this feature to adjust the level of the signal input to 
each jack. This is useful if you want to balance the level of 
each input source to avoid sudden changes in volume 
when switching between input sources.
Input Select > input source (DVD, etc.) > Volume Trim >
Control range: –6.0 dB to +6.0 dB

y
This menu item is also available in the front panel display system 
options menu (see page 85).