Yamaha RX-V2500 Manual Do Utilizador

The display window shows “2: name of selected 
input” or “3: name of selected input” if the remote 
control is in the Zone 2/Zone 3 mode.

Signals input to V-AUX and PHONO jacks cannot be sent to 
Zone 2/Zone 3. 

* VOLUME +/– can be used only when Zone2 Volume or 

Zone3 Volume is set to “Variable” in the GUI menu (see 
page 66).

k

n

• The source in Zone 2 and the source available for recording are 

always the same.

• “ZONE2” or “ZONE3” will appear in the display window only 

when k is pressed, and “SYSTM” only when n is pressed

■

SYSTEM POWER and STANDBY work differently 
depending on the selected mode that appears on the 
display window.
• When normal, Zone 2 or Zone 3 mode is selected, you 

can turn the main unit, Zone 2 or Zone 3 to on/standby 
individually.

• When System mode is selected, or when “2000” or 

“2002” (see page 71) is selected as the amplifier library 
(L:AMP) code, you can turn the main unit, Zone 2 and 
Zone 3 to on/standby simultaneously.

*

“MAIN” appears for a few seconds when SYSTEM POWER 
or STANDBY is pressed.

■

The DTS signal is a digital bitstream. If you attempt to 
send the DTS signal to the second/third room you will 
only hear digital noise (that may damage your speakers). 
Thus, the following considerations and adjustments need 
to be made when playing DTS encoded discs.

Only 2 channel analog audio signals may be sent to the 
second/third room.
Use the disc menu to set the DVD player’s mixed 2-
channel left and right audio outputs to the PCM or Dolby 
Digital soundtrack.

To avoid unexpected noise, DO NOT USE the Zone 2/
Zone 3 feature with CDs encoded in DTS.

*

*

Name of component

Turns the main unit 
on/standby

“Zone2” or “2:name of 
component”

Turns Zone 2 to on/
standby

“Zone3” or “3:name of 
component”

Turns Zone 3 to on/
standby

“SYSTM”

Turns everything (the 
main unit, Zone 2, 
Zone 3) on/standby