Shoprider XtraLite 3 TE-787NA-UL3 Manual Do Utilizador

9/22/2004 

7

 

 

Tiller Angle Adjustment (For XtraLite 4 
& Sunrunner S ONLY) (Fig. 5) 
On the left hand side at the base of the tiller 
is a red lever.  Push the lever in to release 
the pin and select the required tiller angle.  
Refit the pin into one of the five location 
holes. 
 
Folding the Tiller (For XtraLite 3 & 
Scootie ONLY) (Fig. 6) 
Fold down the tiller by loosening the hand 
knob located at the base of the tiller stem. 
 
Seat Slide & Swivel Adjustment (For 
Sunrunner S ONLY) (Fig. 7) 
Pulling up on the lever allows the seat 
position to be adjusted forward or backward.  
Release the lever and the seat will lock in 
that position.  Under the right side of the 
seat there is a spring loaded red lever.  
Pulling up on the lever allows the seat to 
swivel, when released the seat will lock into 
one of 4 positions. 
 
Seat Removal (Fig. 8) 
Fold down the back of the seat.  Remove the 
seat hand knob and locking pin that secures 
the seat adaptor.  Lift the seat adaptor out of 
the seat post. 
 
Seat Height Adjustment (Fig. 8) 
Remove seat as described above.  Loosen 
the lower hand knob.  The seat height can be 
adjusted to 5 different settings by inserting 
the steel locking pin in the required hole.  
Retighten the lower hand knob and replace 
the seat. 
 

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 5 

Figure 7 

Figure 8 

Figure 6 

Seat 
Tightening 
Hand Knob

Swivel Seat 
Adjustment 
Lever 

Tiller Hand 
Knob 

Seat 
Locking Pin

Tiller Angle 
Adjustment 
Lever 

Seat Slide 
Lever 

Seat 
Adaptor