Ricoh WX4130n Manual Do Utilizador
• Energy Saving IO Firmware Version
Display the energy-saving IO firmware version.
Network Settings
Enables the wired LAN and wireless LAN settings, projector ID registration, and network status to be
verified.
Wired LAN
verified.
Wired LAN
Specify the wired LAN settings.
• Wired LAN Settings
• Transmission Speed
Select the wired LAN speed.
Select a speed that matches your network environment. It is recommended that [Auto-
Negotiation] be selected.
Default: [Auto-Negotiation]
Select a speed that matches your network environment. It is recommended that [Auto-
Negotiation] be selected.
Default: [Auto-Negotiation]
• Auto-Negotiation
• 10BASE-T Full Duplex
• 10BASE-T Half Duplex
• 100BASE-TX Full Duplex
• 100BASE-TX Half Duplex
• 10BASE-T Full Duplex
• 10BASE-T Half Duplex
• 100BASE-TX Full Duplex
• 100BASE-TX Half Duplex
• MAC Address
Display the projector's MAC address.
• TCP/IP Settings
• DHCP
Select whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when [Enable] is
selected. When [Disable] is selected, enter the IP address, subnet mask, and default
gateway manually.
Default: [Enable]
The IP address is allocated automatically from the DHCP server when [Enable] is
selected. When [Disable] is selected, enter the IP address, subnet mask, and default
gateway manually.
Default: [Enable]
• Enable
• Disable
• Disable
• IP Address
Enter the projector's IP address.
Default: 0.0.0.0
Default: 0.0.0.0
4. Changing the Projector Settings
96