Samsung OfficeServ Manual Do Utilizador

 

43

This tab enables the user to set general option values of the OfficeServ Operator. 

 
Parameters of the [General] tab are described below:   
 

Extension Passcode 

Enter the passcode of the extension phone.(default : 1234)   

OfficeServ Link IP Addr. 

Enter the IP address of the OfficeServ Link connected to the 
OfficeServ system.   

OfficeServ Link Port 

Enter the port number of the OfficeServ Link.(default : 6000)   

Calls with out of Service 
DID Redirect to 

Enter the number of the station to which incoming calls 
connected to the unselected DID number are transferred. If 
this value is not entered, the incoming calls above will be 
connected to the OfficeServ Operator. 

On Unavail Redirect to 

Enter the extension number to which incoming calls are 
transferred when the OfficeServ Operator is not available. Or, 
Double-click AVAIL/UNAVAIL from the status bar to select an 
extension number. 

Blocked Calls Redirect to 

Enter the extension number to which blocked calls are 
transferred.  
If ‘Automatic Drop’ is selected, a blocked call is transferred to 
the entered extension number and is dropped automatically.   
In this case, a virtual port of the system can be conveniently 
used.  

Default Page Zone 

Enter a value for the default page zone.   
If a user makes a page without designating a zone while the 
default page zone is not set, the page will be made to Zone 0.