HP (Hewlett-Packard) 1660 Manual Do Utilizador
Modify Channel Assignments
In this exercise, you will assign the active bits of pod A1 to the label TCOUNT.
1
Using the arrow keys, highlight the field showing the 16 channels of
Pod A1, to the far right of the TCOUNT label. Press the
Pod A1, to the far right of the TCOUNT label. Press the
Select
key.
2
Press the
Clear Entry
key to clear the default bit assignments.
3
Use the knob to move the cursor to channel 7 in the pop-up menu.
4
Press the
⇑
(up-arrow) key to put asterisks in the lower eight channel
positions.
5
Press the
Done
key.
Modifying Channel Assignments
Result
The lower 8 channels of pod A1 are assigned to the label TCOUNT.
Pod A1 has 16
channels and is
connected to the
training board.
channels and is
connected to the
training board.
An asterisk (*) assigns
a channel to a label. In
this exercise, the lower
eight channels are
assigned to TCOUNT.
a channel to a label. In
this exercise, the lower
eight channels are
assigned to TCOUNT.
Introduction to Timing Analysis
Modify Channel Assignments
Modify Channel Assignments
2-6