DCS 954 Manual Do Utilizador
dCS 954 User Manual
Manual for Standard Software Version 1.5x
dCS Ltd
June 2000
Manual part no: DOC136954 iss 2B1
Page 25
file 135954ma2b1.pdf available from website
Contact
dCS
on + 44 1799 531 999
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
Figure 5 – In-phase Sys waveform
Referring to Figure 5, if the triangular sections point up, that channel is in phase.
A triangular section pointing up with a rectangular block on its left side indicates
left channel. A rectangular block on the right indicates right channel.
A triangular section pointing up with a rectangular block on its left side indicates
left channel. A rectangular block on the right indicates right channel.
Figure 6 shows the waveforms with both channels inverted.
Figure 6 – Out-of-phase Sys waveform
These waveforms are not affected by the setting of the
Phase
button.
Set
Sys
to
Off
when you have finished checking.
Sys
is turned off at power down.