iHome iDM14 Manual Do Utilizador

NOTE: See the iDM14 Bluetooth Connection Guide for complete pairing details.

1. Move the Travel Lock/Aux/Bluetooth Switch on the back of the right speaker to the 

Bluetooth position (right).

2. Press and hold the    Button to turn on the unit (release when    light appears blue).

3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s 

instructions to add or setup a Bluetooth device).

4. Press and hold the Bluetooth/Speakerphone Button on the unit until a blue    light flashes 

on the button and the unit beeps twice to indicate pairing attempt. The blue light will flash 

while the unit attempts to pair. If your device asks for a password, enter 1234 on the 

keyboard of your device.If no device is paired within 2 minutes, the     Button will glow 

red for 2 seconds and the unit will power off. If this occurs, retry steps 2-4.

5. Once paired with a device, the blue     light will glow steadily. There should be an 

indication on your device that pairing is complete. On some devices, you must then select 

“use as a stereo audio device” or similiar on the device’s Bluetooth menu. Once paired, 

your device should link to the iDM14 whenever within range.  

P8

4