Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manual Do Utilizador

Página de 119
Copyright and Technical Support 
Universal IP AT Commands Reference Guide (Document S000457K) 
2 
 
Universal IP AT Commands Reference Guide for the following products: 
SocketModem
 
iCell GPRS (MTSMC-G2-IP, MTSMC-G2-GP) 
SocketModem
 
iCell CDMA (MTSMC-C1-IP, MTSMC-C1-GP) 
SocketModem
  
iCell HSPA (MTSMC-H4-IP, MTSMC-H4-GP)  
SocketModem
  
iCell EV-DO (MTSMC-EV2-IP, MTSMC-EV2-GP) 
SocketModem
 IP (MT5692SMI-IP) This SocketModem uses these commands when the modem is in IP mode 
SocketEthernet IP
 (MT100SEM-IP) 
SocketWireless
 Wi-Fi
 
(MT810SWM-IP) 
MultiModem
 
iCell GPRS (MTCMR-G2, MTCMR-G2-GP)  Uses these commands when the modem is in IP mode 
MultiModem
 iCell CDMA (MTCMR-C1, MTCMR-C1-GP)  Uses these commands when the modem is in IP mode 
MultiModem
 iCell EDGE (MTCMR-E1, MTCMR-E1-GP)  Uses these commands when the modem is in IP mode 
MultiModem
 iCell HSPA (MTCMR-H4, MTCMR-H4-GP)  Uses these commands when the modem is in IP mode 
MultiModem
 iCell EV-DO (MTCMR-EV2, MTCMR-EV2-GP)  Uses these commands when the modem is in IP mode 
 
Product Number of This Document: S000457K, Version K 
Copyright 
This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech 
Systems, Inc. All rights reserved. Copyright © 2008-2010 by Multi-Tech Systems, Inc.   
Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaim 
any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves 
the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech 
Systems, Inc. to notify any person or organization of such revisions or changes.  
Revisions 
Revision Level 
Date 
Description 
 
I 
07/12/10 
Added more detail to Global Positioning System Fix Data. 
Added a Note to the #FTPAPPEND and #FTPGET commands.  
 
 
 
Moved #PERSISTENTSOCKET and #OUTPORT commands from Chapter 1 to both UDP 
and TCP chapters. 
Updated Pin Function Descriptions for Digital Input. 
   
08/09/10 
Changed the response values for #WLANGETRSSI to -256 through -1 dBm. 
   
 
Updated the list of products that use this command set.  
J   
08/24/10 
Added a note to Chapter 15 introduction. In chapter 15 changed the word pin to GPIO
K  
06/17/11 
Added new commands: #SHIELDCHAR, #ESCAPECHAR, #SMPTNETWORKTIMER, 
#TCPPACKETMIN, #TCPPACKETMAX, #TCPINACTIVITYTIMER, 
#TCPNETWORKTIMER, #TCPTELNETMODE, #TCPTELNETPW, #TCPTELNETUN, 
#FTPNETWORKTIMER, #VSHOWSERIAL, #VSHOWUPTIME, #VSHOWUPTIMES, 
#SMSPHRASE, #UDPPACKETMIN, #UDPPACKETMAX, #UDPINACTIVITYTIMER, 
#UDPIGNORESRCPORT, #UDPDLEMODE, #GPIOR, #HOSTNAME. 
   
 
Changed Defaults to 1 in #TCPPORT, #UDPPORT, #KEEPALIVEPORT, #GPSPORT. 
   
 
Added value 4 to #ANSWERMODE. 
   
 
Removed #WLANPROFILE (Load the WLAN Profile); use #WLANPROFILEn=n instead.                          
   
Note:
 
 This product used the FreeRTOS.org real time kernel. The FreeRTOS.org source code can be obtained by visiting 
Trademarks 
Multi-Tech Systems, Inc. registered trademarks include SocketModem, MultiModem and the Multi-Tech logo. 
SkyTraq is a trademark of SkyTraq Technology, Inc. 
 World Headquarters 
Multi-Tech Systems, Inc. 
2205 Woodale Drive 
Mounds View, Minnesota 55112 
Phone:  763-785-3500 or 800-328-9717 
Fax:  763-785-9874 
Internet Address: 
Technical Support 
Please refer to the Copyright/Technical Support page in the product User Guide or Developer Guide
.