Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manual Do Utilizador
Part 2 – AT Commands for the SocketEthernet IP
Chapter 8 – General AT Commands for SocketEthernet IP
Universal IP AT Commands Reference Guide (Document S000457K)
53
#VIP – View Address Settings
Description:
Displays the address settings.
Notes:
This command displays the programmed IP settings. To see IP settings in use, including
DHCP parameters, use the #ETHIFSTATUS command.
Also, this command shows valid results only when DHCP is OFF. Otherwise, it displays the
default or stored values.
default or stored values.
Syntax:
AT#VIP
Values:
None
Example:
The order and content is as follows:
DHCP (Enable/Disable)
DHCP (Enable/Disable)
IP address
Subnet Mask
Default Gateway
Speed setting (see #EMACSPD command)
MAC address