Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manual Do Utilizador
Part 3 – AT Commands for Wi-Fi Devices
Chapter 12 – Telnet AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K)
63
Chapter 12 – Telnet AT Commands for
the SocketWireless Wi-Fi and the
SocketEthernet IP
NOTE: The Telnet commands are used by the SocketEthernet IP (MT100SEM-IP) and the SocketWireless
Wi-Fi (MT810SWM-IP).
Wi-Fi (MT810SWM-IP).
Set Commands
#TELNET – Start/Stop Telnet Session
Description:
Starts and stops a Telnet session.
Note:
The module must be reset to put the command into effect.
Syntax:
AT#TELNET=<0,1>
AT#TELNET? Read or display the current setting.
Values:
0 - Stop Telnet session.
1 - Start Telnet session; wait for remote to Telnet in.
Default:
0
Example:
AT#TELNET?
0
OK
#TELNETPORT– Set Telnet Port
Description:
Sets Telnet port.
Note:
The module must be reset to put the command into effect.
Syntax:
AT#TELNETPORT = <port number>
AT#TELNETPORT? Read or display the current setting (or AT#VTELNET or AT#VALL)
Values:
1 to 65535
Default:
23
Example:
AT#TELNETPORT?
23
OK
#TELNETUSER – Set Telnet User
Description:
Sets Telnet user.
Note:
The module must be reset to put the command into effect.
Syntax:
AT#TELNETUSER= “<64 char string>”
AT# TELNETUSER? Read or display the current setting (or AT#VTELNET or AT#VALL).
Default:
admin
Example:
AT#TELNETUSER?
admin
OK