Manuais de utilizador para Compaq uSign 100

índice analítico

• 1.0 Introduction

  6
• 2.0 Features

  6
• 3.0 Model Designations

  7
• 4.0 Terms & Abbreviations

  7
• 5.0 Installing uSign

  7
  • 5.1 Communication Interfaces

    8
  • 5.2 USB-CDC Setup

    10
• 6.0 Specifications

  10
  • 6.1 Power requirement

    10
  • 6.2 Physical housing uSign 100

    10
  • 6.3 Physical housing uSign 200

    11
  • 6.4 LCD screen & Resistive touch pad

    11
  • 6.5 Communication interface

    11
  • 6.6 LED

    11
  • 6.7 Agency Approvals

    11
  • 6.8 Electronics MTBF

    11
  • 6.9 Electro-Static Discharges (ESD)

    11
  • 6.10 Environmental

    11
• 7.0 uSign commands description

  12
  • 7.1 Command protocol:

    12
  • 7.2 System Commands

    12
    • 7.2.1 Get firmware version

      12
    • 7.2.2 Get serial number

      12
    • 7.2.3 Get clip area

      12
    • 7.2.4 Set clip area

      12
    • 7.2.5 Clear clip area

      12
  • 7.3 One byte commands

    13
    • 7.3.1 Stop Capturing

      13
    • 7.3.2 Start Capturing use FBP format 1

      13
    • 7.3.3 Start Capturing use FBP format 2

      13
    • 7.3.4 Turn red led on

      13
    • 7.3.5 Turn red led off

      13
    • 7.3.6 Clear CMP format mode data

      13
    • 7.3.7 Get data 0x00

      13
    • 7.3.8 Start Capturing use CMP format

      13
    • 7.3.9 Reset points counter

      13
    • 7.3.10 Get point counter high byte

      13
    • 7.3.11 Get point counter low byte

      13
    • 7.3.12 Start Capturing use FBP format 0

      14
  • 7.4 Multi-byte commands

    14
    • 7.4.1 Initialize device

      14
    • 7.4.2 Get PW120 Version

      14
    • 7.4.3 Test device

      14
    • 7.4.4 Set CTS control

      14
    • 7.4.5 Set interval between two points

      14
    • 7.4.6 Get data 0x00 0x01

      14
    • 7.4.7 Calibrate the device

      14
    • 7.4.8 Set offset position

      14
    • 7.4.9 Get data 0x01

      14
    • 7.4.10 Offset using control

      14
    • 7.4.11 Stop Capturing

      15
    • 7.4.12 Start Capturing use FBP format 1

      15
    • 7.4.13 Clear display screen

      15
    • 7.4.14 Draw line

      15
    • 7.4.15 Draw hollow rectangle

      15
    • 7.4.16 Draw solid rectangle

      15
    • 7.4.17 Draw text

      15