Manuais de utilizador para DSCover Satellite Products PC1555MX

índice analítico

• See Back Cover for New Features

  1
• Table of Contents

  3
• PC1555MX Wiring Diagram

  4
• Section 1: System Introduction

  5
  • 1.1 Specifications

    5
    • Downloading Software Support

      5
    • Flexible Zone Configuration

      5
    • Audible Alarm Output

      5
    • EEPROM Memory

      5
    • Programmable Outputs

      5
    • Powerful 1.5 Amp Regulated Power Supply

      5
    • Power Requirements

      5
    • Remote Keypad Specifications

      5
    • Digital Communicator Specifications*

      5
    • System Supervision Features

      5
    • False Alarm Prevention Features

      5
    • Additional Features

      5
  • 1.2 Additional Devices

    6
    • PC5132 Wireless Receiver

      6
    • WLS904 Wireless Motion Detector: Adds wireless space protection to your system

      6
    • WLS905 Wireless Universal Transmitter: Adds wireless door or window contacts to your system.

      6
    • WLS906 Wireless Smoke Detector: Adds smoke detection to your system.

      6
    • WLS907 Wireless Slimline Universal Transmitter: A smaller wireless door or window contact.

      6
    • WLS908 Wireless Panic Pendant: Adds personal protection to the system. When used, the unit will i...

      6
    • WLS909 Wireless Key : Adds a simple and mobile method of arming and disarming to the system, as w...

      6
    • WLS910 Wireless Handheld Keypad*: A portable keypad which allows arming and disarming from anywhe...

      6
      • PC5400 Printer Module

        6
      • PC5204 Power Supply Output Module

        6
      • PC5208 Eight Low Current Output Module

        6
      • Escort5580 Module

        6
      • PC5928/PC5936 Audio Interface Modules

        6
      • PC5921 Intercom Audio Station

        6
      • PC5921 EXT Door Box Audio Station

        6
      • PC5921 EXT/R Door Box Audio Station

        6
      • PC5904 Central Station Talk/Listen Module

        6
      • LINKS1000 Cellular Communicator*

        6
      • LINKS2X50*

        6
      • Skyroute Transceiver*

        6
      • Cabinets

        6
    • PC5003C Cabinet

      6
    • PC5004C Cabinet

      6
      • Backplates

        6
    • PC55BP1 Backplate

      6
    • PC55BP2 Backplate

      6
  • 1.3 Out of the Box

    6
• Section 2: Getting Started

  7
  • 2.1 Installation Steps

    7
    • Step 1: Create a Layout

      7
    • Step 2: Mounting the Panel

      7
    • Step 3: Wiring the Keybus (Section 2.3)

      7
    • Step 4: Zone Wiring (Section 2.8)

      7
    • Step 5: Complete Wiring (Section 2.2)

      7
    • Step 6: Power up the Control

      7
    • Step 7: Keypad Assignment (Section 2.5)

      7
    • Step 8: Supervision (Section 2.6)

      7
    • Step 9: Programming the System (Sections 4 & 5)

      7
    • Step 10: Testing the System

      7
  • 2.2 Terminal Descriptions

    7
    • Battery Connection

      7
    • AC Terminals – AC

      7
    • Auxiliary Power Terminals – AUX+ and AUX-

      7
    • Bell Output Terminals – BELL+ and BELL-

      7
    • Keybus Terminals – AUX+, AUX-, YEL, GRN

      7
    • Programmable Output Terminals – PGM1 and PGM2

      8
    • Zone Input Terminals – Z1 to Z6

      8
    • Telephone Connection Terminals – TIP, RING, T-1, R1

      8
  • 2.3 Wire Routing for Power & Non-Power Limited

    8
  • 2.4 Keybus Operation & Wiring

    8
    • Example of Keybus Wiring

      8
  • 2.5 Current Ratings – Modules & Accessories

    9
    • PC1555MX (12 Vdc)

      9
    • PC1555MX Device Ratings (at 12 Vdc)

      9
    • Other Devices

      9
  • 2.6 Keypad Assignment

    9
    • How to Assign Keypads

      9
    • How to Program Function Keys

      9
  • 2.7 Supervision

    9
  • 2.8 Removing Modules

    9
  • 2.9 Zone Wiring

    9
    • Normally Closed (NC) Loops

      9
    • Single End Of Line (EOL) Resistors (5600W)

      10
    • Double End of Line (DEOL) Resistors

      10
  • 2.10 Fire Zone Wiring

    10
    • 4-Wire Smoke Detectors

      10
    • 2-Wire Smoke Detectors (50/300 only)

      10
  • 2.11 24-Hr Auxiliary Input Wiring (PGM2)

    10
  • 2.12 LINKS Zone Wiring*

    10
    • LINKS Support

      10
    • LINKS Supervision (24 Hour Supervisory)

      11
    • LINKS Answer

      11
  • 2.13 Keypad Zones

    11
    • Assigning Keypad Zones

      11
• Section 3: Keypad Commands

  12
  • 3.1 Arming and Disarming

    12
  • 3.2 Auto Bypass – Stay Arming

    12
  • 3.3 Automatic Arming

    12
  • 3.4 [*] Commands

    12
    • [*][1] Bypassing and Activating Stay/Away Zones

      12
    • Activate Stay/Away Zones

      12
    • [*][2] Trouble Display

      13
    • To view trouble conditions from an LED keypad:

      13
      • [*][3] Alarm Memory

        13
      • [*][4] Door Chime On/Off

        13
      • [*][5] Programming Access Codes

        14
    • Master Code – Access Code (40)

      14
    • General Access Codes – Access Codes (01) to (32)

      14
    • Duress Code – Access Code (33) and (34)

      14
    • Supervisor Codes – Access Code (41) and (42)

      14
    • Access Code Attributes

      14
      • [*][6] User Functions

        14
      • Additional Features Available from the LCD Keypad

        14
    • Viewing the Event Buffer from an LCD Keypad

      14
    • Brightness Control

      15
    • Contrast Control

      15
    • Keypad Sounder Control

      15
      • [*][7] Command Output Functions

        15
    • Command Output Options 1-4:

      15
    • [*][7][2] – Command Output Option #2:

      15
      • [*][8] Installer’s Programming

        15
      • [*][9] Arming Without Entry Delay

        15
      • [*][0] Quick Arm

        15
      • [*][0] Quick Exit

        15
  • 3.5 Function Keys

    15
    • “Stay” – (03) Stay Arm

      15
    • “Away” – (04) Away Arm

      15
    • “Chime” – (06) Door Chime On / Off

      15
    • “Reset” – (14) Sensor Reset or [*][7][2]

      15
    • “Exit” – (16) Activate Quick Exit

      15
    • Additional Function Key Options

      15
  • 3.6 Features Available for the LCD5500Z

    16
    • Automatic Scrolling of Alarms in Memory

      16
    • 24 Hour Time Display Option

      16
    • Keypad Zones

      16
    • Viewing Troubles While Armed

      16
    • Backlighting Boost

      16
• Section 4: How to Program

  17
  • 4.1 Installer’s Programming

    17
    • From an LED Keypad:

      17
    • From an LCD Keypad:

      17
  • 4.2 Programming Decimal Data

    17
  • 4.3 Programming HEX Data

    17
    • Example:

      17
    • [*][3][*], [1]:

      17
    • Example:

      17
    • [4], [*][1][*][3], [0]:

      17
  • 4.4 Programming Toggle Option Sections

    18
  • 4.5 Viewing Programming

    18
    • LED Keypads

      18
    • LCD Keypad

      18
• Section 5: Program Descriptions

  19
  • 5.1 Programming Security Codes

    19
  • 5.2 Zone Programming

    19
    • Zone Definitions

      19
    • [00] Null Zone

      19
    • [01] Delay 1 Zone

      19
    • [02] Delay 2 Zone

      19
    • [03] Instant Zone

      19
    • [04] Interior Zone

      19
    • [05] Interior Stay/Away Zone

      19
    • [06] Delay Stay/Away Zone

      19
    • [07] Delayed 24 Hour Fire Zone

      19
    • [08] Standard 24 Hour Fire Zone

      20
    • [09] 24 Hour Supervisory Zone

      20
    • [10] 24 Hour Supervisory Buzzer Zone

      20
    • [11] 24 Hour Burglary Zone

      20
    • [12] - [20]

      20
    • [22] Momentary Keyswitch Arm Zone

      20
    • [23] Maintained Keyswitch Arm Zone

      20
    • [24] LINKS Answer Zone

      20
    • [25] Interior Delay Zone

      20
    • [87] Delayed 24 Hour Fire (Wireless)

      20
    • [88] Standard 24 Hour Fire (Wireless)

      20
  • 5.3 Zone Attributes

    20
  • 5.4 Assigning Keypad Zones

    21
  • 5.5 Communicator – Dialing

    21
  • 5.6 Communicator – Account Numbers

    21
  • 5.7 Communicator – Telephone Numbers

    21
    • Two-way Voice Monitoring

      21
  • 5.8 Communicator – Reporting Codes

    21
    • Cross Zone Police Reporting Code

      22
    • Zone Restorals

      22
    • Closings (Arming Codes)

      22
    • Openings/Closings by Wireless Key

      22
    • AC Failure Trouble Alarm Code

      22
    • Wireless Maintenance

      22
    • Arming and Activity Delinquency

      22
  • 5.9 Communicator – Reporting Formats

    22
    • Pulse Formats

      23
    • Contact ID

      23
    • Additional Notes on Contact ID

      23
      • SIA

        23
      • Pager Format

        23
  • 5.10 Downloading

    24
  • 5.11 PGM Output Options

    24
    • [01] Burglary and Fire Bell Output

      24
    • [02] For Future Use

      24
    • [03] Sensor Reset ([*][7][2])

      24
    • [04] 2-Wire Smoke (PGM2 only)

      24
    • [05] Armed Status

      25
    • [06] Ready To Arm

      25
    • [07] Keypad Buzzer Follower Mode

      25
    • [08] Courtesy Pulse

      25
    • [09] System Trouble Output

      25
    • Attribute

      25
    • [10] System Event (Strobe Output)

      25
    • Attribute

      25
    • [11] System Tamper (All Sources)

      25
    • [12] TLM and Alarm

      25
    • [13] Kissoff Output

      25
    • [14] Ground Start Pulse

      25
    • [15] Remote Operation (DLS-1 Support)

      25
    • [16] LINKS1000 Support (PGM1 Only)

      25
    • [17] Away Armed Status

      25
    • [18] Stay Armed Status

      26
    • [19] [*][7][1] Command Output Option #1

      26
    • [20] [*][7][2] Command Output Option #2

      26
    • [21] [*][7][3] Command Output Option #3

      26
    • [22] [*][7][4] Command Output Option #4

      26
    • NOTES on Option [20] [*][7][2]:

      26
    • [23] Silent 24 Hour (PGM2 Only)

      26
    • [24] Audible 24 Hour (PGM2 Only)

      26
      • PGM Output Attributes

        26
  • 5.12 Telephone Line Monitor (TLM)

    26
  • 5.13 Bell

    26
  • 5.14 Test Transmission

    27
  • 5.15 Transmission Delay

    27
  • 5.16 Fire, Auxiliary and Panic Keys

    27
  • 5.17 Arming/Disarming Options

    27
  • 5.18 Entry/Exit Delay Options

    28
  • 5.19 Swinger Shutdown

    28
  • 5.20 Event Buffer

    28
  • 5.21 Keypad Lockout Options

    28
  • 5.22 Keypad Blanking

    29
  • 5.23 Keypad Backlighting

    29
  • 5.24 Loop Response

    29
  • 5.25 Keypad Tampers

    29
  • 5.26 LINKS1000 Cellular Communicator*

    29
    • Using LINKS1000 as the Sole Communicator

      29
    • Using the LINKS1000 as a Backup Communicator

      29
    • Using the LINKS as a Redundant Communicator

      29
    • LINKS Special Preamble

      29
  • 5.27 Additional System Modules*

    30
  • 5.28 Resetting Factory Defaults*

    30
  • 5.29 Installer’s Lockout

    30
  • 5.30 Walk Test (Installer)

    30
    • To perform a walk test:

      30
    • To stop the test:

      30
• Section 6: Programming Worksheets

  31
  • For the Record

    31
    • Customer:

      31
    • Address:

      31
    • Telephone: Installation Date:

      31
    • Installer’s Code:

      31
    • Module Name Description Location

      31
      • PC1555MX Main Panel I____________________________________________________________________________...

        31
      • PC5132 Wireless Receiver I_______________________________________________________________________...

        31
      • PC5204 Power Supply Module I_____________________________________________________________________...

        31
      • PC5208 Low-Current PGM Module I__________________________________________________________________...

        31
      • PC59XX Audio Interface Module I__________________________________________________________________...

        31
      • Escort5580(TC) Voice Prompt Module I_____________________________________________________________...

        31
      • PC5400 Serial Printer Module I___________________________________________________________________...

        31
      • LINKS1000 Cellular Communicator I________________________________________________________________...

        31
      • LINKS2X50 Long Range Radio I_____________________________________________________________________...

        31
      • Skyroute Transceiver I___________________________________________________________________________...

        31
    • Keypads Keypad Type Location

      31
      • Keypad 1 I_____________________________________________I I_______________________________________...

        31
      • Keypad 2 I_____________________________________________I I_______________________________________...

        31
      • Keypad 3 I_____________________________________________I I_______________________________________...

        31
      • Keypad 4 I_____________________________________________I I_______________________________________...

        31
      • Keypad 5 I_____________________________________________I I_______________________________________...

        31
      • Keypad 6 I_____________________________________________I I_______________________________________...

        31
      • Keypad 7 I_____________________________________________I I_______________________________________...

        31
      • Keypad 8 I_____________________________________________I I_______________________________________...

        31
  • Zone Programming Summary

    32
    • Zone programming can be found in sections [001] - [004], [101] - [132], [020] and [202] - [205]. ...

      32
    • System Zone Label Zone Zone Attributes* Serial Number

      32
    • Zone Type 1 2 3 4 5 6 7 8 (Wireless)

      32
      • Zone 1 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 2 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 3 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 4 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 5 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 6 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 7 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 8 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 9 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I___...

        32
      • Zone 10 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 11 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 12 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 13 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 14 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 15 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 16 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 17 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 18 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 19 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 20 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 21 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 22 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 23 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 24 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 25 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 26 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 27 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 28 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 29 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 30 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 31 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Zone 32 I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I I__...

        32
      • Option 1: Audible/Silent Option 5: Force**

        32
      • Option 2: Steady/Pulsed Option 6: Swinger Shutdown

        32
      • Option 3: Chime Option 7: Transmission Delay

        32
      • Option 4: Bypass Option 8: Wireless

        32
      • **NOTE: Option 5, Force Arming is not recommended for UL installations.

        32
  • Keypad Programming

    33
    • [000] Keypad Enrollment (Section 2.6 “Keypad Assignment” on page 5)

      33
      • [0] Slot [Valid entries are 11-18; i.e. enter [11] for slot 1, [12] for slot 2, etc.]

        33
      • [1] Function Key 1 Assignment (Valid entries are 00-21)

        33
      • [2] Function Key 2 Assignment (Valid entries are 00-21)

        33
      • [3] Function Key 3 Assignment (Valid entries are 00-21)

        33
      • [4] Function Key 4 Assignment (Valid entries are 00-21)

        33
      • [5] Function Key 5 Assignment (Valid entries are 00-21)

        33
    • Function Key Options:

      33
      • 06 [*][4] Chime On / Off

        33
      • 07 [*][6][——][4] System Test

        33
    • Slot Function Function Function Function Function

      33
    • Key 1 Key 2 Key 3 Key 4 Key 5

      33
      • LED Defaults 11 03 04 06 14 16

        33
      • LCD Defaults 18 03 04 06 14 16

        33
      • KEYPAD 1 I________I________I I________I I________I I________I I________I I________I

        33
      • KEYPAD 2 I________I________I I________I I________I I________I I________I I________I

        33
      • KEYPAD 3 I________I________I I________I I________I I________I I________I I________I

        33
      • KEYPAD 4 I________I________I I________I I________I I________I I________I I________I

        33
      • KEYPAD 5 I________I________I I________I I________I I________I I________I I________I

        33
      • KEYPAD 6 I________I________I I________I I________I I________I I________I I________I

        33
      • KEYPAD 7 I________I________I I________I I________I I________I I________I I________I

        33
      • KEYPAD 8 I________I________I I________I I________I I________I I________I I________I

        33
  • Basic Programming

    33
    • Zone Definitions

      33
    • [001] Zone 1-8 Definitions (Section 5.2 “Zone Programming” on page 15)

      33
    • Default Default

      33
      • 01 I_______I_______I Zone 1 04 I_______I_______I Zone 5

        33
      • 03 I_______I_______I Zone 2 04 I_______I_______I Zone 6

        33
      • 03 I_______I_______I Zone 3 00 I_______I_______I Zone 7

        33
      • 03 I_______I_______I Zone 4 00 I_______I_______I Zone 8

        33
      • [002] Zone 9-16 Definitions (Section 5.2 “Zone Programming” on page 15)

        34
    • Default Default

      34
      • 00 I_______I_______I Zone 9 00 I_______I_______I Zone 13

        34
      • 00 I_______I_______I Zone 10 00 I_______I_______I Zone 14

        34
      • 00 I_______I_______I Zone 11 00 I_______I_______I Zone 15

        34
      • 00 I_______I_______I Zone 12 00 I_______I_______I Zone 16

        34
      • [003] Zone 17-24 Definitions (Section 5.2 “Zone Programming” on page 15)

        34
    • Default Default

      34
      • 00 I_______I_______I Zone 17 00 I_______I_______I Zone 21

        34
      • 00 I_______I_______I Zone 18 00 I_______I_______I Zone 22

        34
      • 00 I_______I_______I Zone 19 00 I_______I_______I Zone 23

        34
      • 00 I_______I_______I Zone 20 00 I_______I_______I Zone 24

        34
      • [004] Zone 25-32 Definitions (Section 5.2 “Zone Programming” on page 15)

        34
    • Default Default

      34
      • 00 I_______I_______I Zone 25 00 I_______I_______I Zone 29

        34
      • 00 I_______I_______I Zone 26 00 I_______I_______I Zone 30

        34
      • 00 I_______I_______I Zone 27 00 I_______I_______I Zone 31

        34
      • 00 I_______I_______I Zone28 00 I_______I_______I Zone 32

        34
      • [005] System Times

        34
    • Default Valid entries: [001-255]

      34
      • 030 I_______I_______I_______I Entry Delay 1 (in seconds) (Section 5.18 “Entry/Exit Delay Options”...

        34
      • 045 I_______I_______I_______I Entry Delay 2 (in seconds) (Section 5.18 “Entry/Exit Delay Options”...

        34
      • 120 I_______I_______I_______I Exit Delay (in seconds) (Section 5.18 “Entry/Exit Delay Options” on...

        34
      • 004 I_______I_______I_______I Bell Cut-off (in minutes) (Section 5.13 “Bell” on page 22)

        34
      • [006] Installer’s Code (Section 4.1 “Installer’s Programming” on page 13)

        34
    • Default

      34
      • 5555 I_______I_______I_______I_______I

        34
      • [007] Master Code (Section 5.1 “Programming Security Codes” on page 15)

        34
    • Default

      34
      • 1234 I_______I_______I_______I_______I

        34
      • [008] Maintenance Code (Section 5.1 “Programming Security Codes” on page 15)

        34
    • Default

      34
      • AAAA I_______I_______I_______I_______I

        34
      • [009] PGM Output Programming (PGM 1 and 2) (Section 5.11 “PGM Output Options” on page 20)

        34
    • Programmable Output Options

      34
      • 01 Burglary and Fire Bell Output 14 Ground Start Pulse

        34
      • 02 For Future Use 15 Remote Operation (DLS-1 Support)

        34
      • 03 Sensor Reset 16 LINKS1000 Support (PGM1 only)

        34
      • 04 2-wire smoke (50/300 only) 17 Away Armed Status

        34
      • 05 System Armed Status 18 Stay Armed Status

        34
      • 06 Ready To Arm 19 Command Output #1 ([*][7][1])

        34
      • 07 Keypad Buzzer Follow Mode 20 Command Output #2 ([*][7][2])

        34
      • 08 Courtesy Pulse 21 Command Output #3 ([*][7][3])

        34
      • 09 System Trouble Output (with Trouble options) 22 Command Output #4 ([*][7][4])

        34
      • 10 System Event [Strobe (with Event options)] 23 Silent 24 Hour (PGM2 Only)

        34
      • 11 System Tamper (all sources: zones, kpd, modules) 24 Audible 24 Hour (PGM2 Only)

        34
      • 12 TLM and Alarm

        34
      • 13 Kissoff Output

        34
    • Default Default

      34
      • 19 I_______I_______I PGM 1 10 I_______I_______I PGM 2 Program PGM Option Attributes in sections [...

        34
      • [010] PC5208 PGM Output Programming (PGM 3-10) (Section 5.11 “PGM Output Options” on page 20)

        35
    • Default Default

      35
      • 01 I_______I_______I PGM 3 01 I_______I_______I PGM 7

        35
      • 01 I_______I_______I PGM 4 01 I_______I_______I PGM 8

        35
      • 01 I_______I_______I PGM 5 01 I_______I_______I PGM 9

        35
      • 01 I_______I_______I PGM 6 01 I_______I_______I PGM 10

        35
      • Program PGM Option Attributes in sections [143] - [150].

        35
      • [011] PC5204 PGM Output Programming (PGM 11-14) (Section 5.11 “PGM Output Options” on page 20)

        35
    • Default Default

      35
      • 01 I_______I_______I PGM 11 01 I_______I_______I PGM 13

        35
      • 01 I_______I_______I PGM 12 01 I_______I_______I PGM 14

        35
      • Program PGM Option Attributes in sections [151] - [154].

        35
      • [012] Keypad Lockout Options (Section 5.21 “Keypad Lockout Options” on page 24)

        35
    • Default

      35
      • 000 I_______I_______I_______I Number of Invalid Codes Before Lockout (001-255 codes)

        35
      • 000 I_______I_______I_______I Lockout Duration (001-255 minutes)

        35
      • [013] First System Option Code

        35
    • Default Option ON Off Section Page #

      35
      • OFF I________I 1 Normally Closed Loops End-of-Line Resistors 2.9 5

        35
      • OFF I________I 2 Double End-of-Line Resistors Single End-of-Line Resistors 2.9 5

        35
      • ON* I________I 3 Panel shows all troubles when armed Panel shows only Fire troubles when armed 3.4 8

        35
      • OFF I________I 4 Tampers/Faults do not show as open Tampers/Faults show as open 3.4 8

        35
      • OFF I________I 5 For future use

        35
      • ON I________I 6 Audible Exit Fault Enabled Audible Exit Fault Disabled 5.18 24

        35
      • ON I________I 7 Event Buffer Follows Swinger Shutdown Event Buffer Logs Events Past shutdown 5.20 24

        35
      • OFF I________I 8 Temporal Three Fire Signal Enabled** Standard Pulsed Fire Signal 5.13 22

        35
      • * Option 3 must be OFF if LCD keypads older than v2.0 are used.

        35
      • **The Temporal Three Fire Signal option must be used for UL Household Fire installations.

        35
      • [014] Second System Option Code

        35
    • Default Option ON Off Section Page #

      35
      • OFF I________I 1 Arm / Disarm Bell Squawk enabled Arm / Disarm Bell Squawk disabled 5.17 23

        35
      • OFF I________I 2 Bell Squawk During Auto Arm No Bell Squawk During Auto Arm 5.18 24

        35
      • OFF I________I 3 Bell Squawk On Exit Delay No Bell Squawk On Exit Delay 5.18 24

        35
      • OFF I________I 4 Bell Squawk On Entry Delay No Bell Squawk On Entry Delay 5.18 24

        35
      • OFF I________I 5 Bell Squawk On Trouble No Bell Squawk On Trouble 3.4 8

        35
      • ON I________I 6 Audible Exit with Urgency Silent Exit Delay 5.18 24

        35
      • OFF I________I 7 Exit Delay Termination Enabled Exit Delay Termination Disabled 5.18 24

        35
      • OFF I________I 8 Fire Bell is Continuous Fire Bell Follows Bell Cut-off 5.13 22

        35
      • [015] Third System Option Code

        36
    • Default Option ON Off Section Page #

      36
      • ON I________I 1 Fire Keys Enabled Fire Keys Disabled 5.16 23

        36
      • OFF I________I 2 Panic Keys Audible (Bell / Beeps) Panic Keys Silent 5.16 23

        36
      • OFF I________I 3 Quick Exit Enabled Quick Exit Disabled 3.4 8

        36
      • ON* I________I 4 Quick Arming Enabled Quick Arming Dis. / Function keys Req. Code 3.4 8

        36
      • OFF I________I 5 Code Required For Bypassing No Code Required 3.4 8

        36
      • OFF I________I 6 Master Code Not Changeable Master Code Changeable 5.1 15

        36
      • ON I________I 7 TLM Enabled TLM Disabled 5.12 22

        36
      • OFF I________I 8 TLM Audible (Bell) When Armed TLM Trouble Beeps When Armed 5.12 22

        36
      • * When using a PC5132 version 2.1 or older with WLS909 Wireless Keys, option [4] must be ON for t...

        36
      • [016] Fourth System Option Code

        36
    • Default Option ON Off Section Page #

      36
      • ON I________I 1 AC Trouble Displayed AC Trouble Not Displayed 3.4 8

        36
      • OFF I________I 2 Trouble Light Flashes if AC Fails Trouble Light Does Not Follow AC Status 3.4 8

        36
      • OFF I________I 3 Blank Keypad When Not Used Keypad Active Always 5.22 25

        36
      • OFF I________I 4 Code Required to Remove Kypd Blanking No Code Required 5.22 25

        36
      • ON I________I 5 Keypad Backlighting is enabled Keypad Backlighting is disabled 5.23 25

        36
      • OFF I________I 6 Power Save Mode enabled Power Save Mode disabled 5.22 25

        36
      • OFF I________I 7 Bypass Status Displayed While Armed Bypass Status Not Displayed While Armed 5.17 23

        36
      • OFF I________I 8 Keypad Tampers enabled Keypad Tampers disabled 5.25 25

        36
      • [017] Fifth System Option Code

        36
    • Default Option ON Off Section Page #

      36
      • ON I________I 1 WLS Key Does Not Use Access Codes* WLS Key Uses Access Codes 5.17 23

        36
      • OFF I________I 2-7 For Future Use

        36
      • OFF I________I 8 Squawk on Away Arming/Disarming Only Bell Squawk on all Arming/Disarming 5.17 23

        36
      • [020] Keypad Zone Assignments (Section 2.13 “Keypad Zones” on page 7)

        36
    • Default

      36
      • 00 I________I_______I Keypad (slot 1) Zone Valid entries are zones 01-32

        36
      • 00 I________I_______I Keypad (slot 2) Zone Valid entries are zones 01-32

        36
      • 00 I________I_______I Keypad (slot 3) Zone Valid entries are zones 01-32

        36
      • 00 I________I_______I Keypad (slot 4) Zone Valid entries are zones 01-32

        36
      • 00 I________I_______I Keypad (slot 5) Zone Valid entries are zones 01-32

        36
      • 00 I________I_______I Keypad (slot 6) Zone Valid entries are zones 01-32

        36
      • 00 I________I_______I Keypad (slot 7) Zone Valid entries are zones 01-32

        36
      • 00 I________I_______I Keypad (slot 8) Zone Valid entries are zones 01-32

        36
      • [030] Zone Loop Response Options

        36
    • Default Option ON Off Section Page #

      36
      • OFF I________I 1 Zone 1 is Fast Loop Response Zone 1 is Normal Loop Response 5.24 25

        36
      • OFF I________I 2 Zone 2 is Fast Loop Response Zone 2 is Normal Loop Response 5.24 25

        36
      • OFF I________I 3 Zone 3 is Fast Loop Response Zone 3 is Normal Loop Response 5.24 25

        36
      • OFF I________I 4 Zone 4 is Fast Loop Response Zone 4 is Normal Loop Response 5.24 25

        36
      • OFF I________I 5 Zone 5 is Fast Loop Response Zone 5 is Normal Loop Response 5.24 25

        36
      • OFF I________I 6 Zone 6 is Fast Loop Response Zone 6 is Normal Loop Response 5.24 25

        36
      • OFF I________I 7-8 For future use

        36
  • Advanced System Programming

    37
    • Zone Attributes (Section 5.3 “Zone Attributes” on page 16)

      37
    • Zone Attribute Defaults (Y = Option ON; N = Option OFF):

      37
      • Attribute:

        37
      • 1

        37
      • 2

        37
      • 3

        37
      • 4

        37
      • 5

        37
      • 6

        37
      • 7

        37
      • 8

        37
      • ON

        37
      • Audible

        37
      • Steady

        37
      • Chime

        37
      • Bypass

        37
      • Force*

        37
      • Swing

        37
      • Tx. Delay

        37
      • Wireless Zn.

        37
      • OFF

        37
      • Silent

        37
      • Pulsed

        37
      • No

        37
      • No

        37
      • No

        37
      • No

        37
      • No

        37
      • No

        37
      • *NOTE: For UL installations, do not change attribute 5 (Force Arming) from the default setting.

        37
    • Section Zone # Zone 1 2 3 4 5 6 7 8 Type*

      37
      • [101] 1 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [102] 2 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [103] 3 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [104] 4 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [105] 5 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [106] 6 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [107] 7 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [108] 8 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [109] 9 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [110] 10 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [111] 11 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [112] 12 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [113] 13 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [114] 14 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [115] 15 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        37
      • [116] 16 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [117] 17 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [118] 18 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [119] 19 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [120] 20 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [121] 21 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [122] 22 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [123] 23 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [124] 24 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [125] 25 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [126] 26 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [127] 27 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [128] 28 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [129] 29 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [130] 30 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [131] 31 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • [132] 32 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        38
      • *Record here based on programming in sections [001] - [004]

        38
      • PGM Output Attributes (Section 5.11 “PGM Output Options” on page 20)

        38
        • Program only the following attributes for the PGM options listed. All others will be ignored. PGM...

          38
    • PGM Attribute Defaults (Y = Attribute ON; N = Attribute OFF):

      38
    • Section PGM Output 1 2 3 4 5 6 7 8 # Type*

      39
      • Main Board

        39
      • [141] 1 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [142] 2 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • PC5208

        39
      • [143] 3 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [144] 4 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [145] 5 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [146] 6 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [147] 7 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [148] 8 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [149] 9 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [150] 10 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • PC5204

        39
      • [151] 11 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [152] 12 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [153] 13 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • [154] 14 ( ) I________I I________| I________| I________| I________| I________| I________| I________I

        39
      • *Record here based on programming in [009], [010] and [011].

        39
      • [160] Maximum Dialing Attempts to Each Telephone Number (Section 5.5 “Communicator – Dialing” on ...

        39
        • Default: 008 I_______I_______I_______I Valid entries are 001-015 attempts (do not enter 000).

          39
      • [161] Post Dial Wait for Handshake (All Formats) (Section 5.5 “Communicator – Dialing” on page 17)

        39
        • Default: 040 I_______I_______I_______I Valid entries are 001-255 seconds

          39
      • [164] PGM Output Timer (Section 5.11 “PGM Output Options” on page 20)

        39
        • Default: 005 I_______I_______I_______I Valid entries are 001-255 seconds

          39
      • [202] Zone Assignments 01-08 (Section 5.2 “Zone Programming” on page 15)

        39
        • Program zone definitions in sections [001] - [004] and zone attributes in sections [101] - [132]....

          39
    • Zones 1-8: Default = ON; Zones 9-32: Default = OFF

      39
    • Section Option: 1 2 3 4 5 6 7 8

      39
      • [202] Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8

        39
      • I______________I I______________I I______________I I______________I I______________I I___________...

        39
      • [203] Zone 9 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16

        39
      • I______________I I______________I I______________I I______________I I______________I I___________...

        39
      • [204] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24

        39
      • I______________I I______________I I______________I I______________I I______________I I___________...

        39
      • [205] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32

        39
      • I______________I I______________I I______________I I______________I I______________I I___________...

        39
  • Communicator Programming

    40
    • [301] First Telephone Number (32 Digits) (Section 5.7 “Communicator – Telephone Numbers” on page 17)

      40
      • I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

        40
    • [302] Second Telephone Number (32 Digits) (Section 5.7 “Communicator – Telephone Numbers” on page...

      40
      • I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

        40
    • [303] Third Telephone Number (32 Digits) (Section 5.7 “Communicator – Telephone Numbers” on page 17)

      40
      • I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

        40
    • [310] First/Third Telephone Number Account Code (Section 5.6 “Communicator – Account Numbers” on ...

      40
      • I_______I_______I_______I_______I

        40
    • [311] Second Telephone Number Account Code (Section 5.6 “Communicator – Account Numbers” on page 17)

      40
      • I_______I_______I_______I_______I

        40
    • Alarm Reporting Codes, Zones 1-32 (Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appe...

      40
      • Section

        40
      • [320] Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
      • [321] Zone 9 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
      • [322] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
      • [323] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
    • Alarm Restoral Reporting Codes, Zones 1-32 (Section 5.8 “Communicator – Reporting Codes” on pg. 1...

      40
      • Section

        40
      • [324] Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
      • [325] Zone 9 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
      • [326] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
      • [327] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32

        40
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        40
    • [328] Miscellaneous Alarm Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on pg. 17...

      40
      • I_______I_______I 1. Duress Alarm I_______I_______I 4. Zone Expander Supervisory Alarm

        40
      • I_______I_______I 2. Opening After Alarm I_______I_______I 5. Zone Expander Supervisory Restoral

        40
      • I_______I_______I 3. Recent Closing I_______I_______I 6. Cross Zone Police Code Alarm

        40
    • [329] Priority Alarm and Restoral (Section 5.8 “Communicator – Reporting Codes” on pg. 17, & Appe...

      40
      • I_______I_______I 1. Keypad Fire Alarm I_______I_______I 5. Keypad Fire Restoral

        40
      • I_______I_______I 2. Keypad Auxiliary Alarm I_______I_______I 6. Keypad Auxiliary Restoral

        40
      • I_______I_______I 3. Keypad Panic Alarm I_______I_______I 7. Keypad Panic Restoral

        40
      • I_______I_______I 4. PGM2 Alarm I_______I_______I 8. PGM2 Restoral

        40
    • Tamper Reporting Codes, Zones 1-32 (Section 5.8 “Communicator – Reporting Codes” on pg. 17, & App...

      41
      • Section

        41
      • [330] Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [331] Zone 9 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [332] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [333] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
    • Tamper Restoral Reporting Codes, Zones 1-8 (Section 5.8 “Communicator – Reporting Codes” on pg. 1...

      41
      • Section

        41
      • [334] Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [335] Zone 9 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [336] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [337] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
    • [338] Miscellaneous Tamper Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on pg. 1...

      41
      • I_______I_______I 1. General System Tamper

        41
      • I_______I_______I 2. General System Tamper Rest.

        41
      • I_______I_______I 3. Keypad Lockout

        41
    • Closing (Arming) Reporting Codes, Access Codes 1-32 (Section 5.8 “Communicator – Reporting Codes”...

      41
      • Section

        41
      • [339] Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [340] Code 9 Code 10 Code 11 Code 12 Code 13 Code 14 Code 15 Code 16

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [341] Code 17 Code 18 Code 19 Code 20 Code 21 Code 22 Code 23 Code 24

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [342] Code 25 Code 26 Code 27 Code 28 Code 29 Code 30 Code 31 Code 32

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
    • [343] Miscellaneous Closing (Arming) Reporting Codes (Section 5.8 “Communicator – Reporting Codes...

      41
      • I_______I_______I 1. Closing by Duress Code 33 I_______I_______I 5. Closing by Supervisory Code 42

        41
      • I_______I_______I 2. Closing by Duress Code 34 I_______I_______I 6. Partial Closing

        41
      • I_______I_______I 3. Closing by Master Code 40 I_______I_______I 7. Special Closing

        41
      • I_______I_______I 4. Closing by Supervisory Code 41

        41
    • Opening (Disarming) Reporting Codes, Access Codes 1-8 (Section 5.8 “Communicator – Reporting Code...

      41
      • Section

        41
      • [344] Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [345] Code 9 Code 10 Code 11 Code 12 Code 13 Code 14 Code 15 Code 16

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [346] Code 17 Code 18 Code 19 Code 20 Code 21 Code 22 Code 23 Code 24

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
      • [347] Code 25 Code 26 Code 27 Code 28 Code 29 Code 30 Code 31 Code 32

        41
      • I_______I_______I I_______I_______I I_______I_______I I_______I_______I I_______I_______I I______...

        41
    • [348] Miscellaneous Opening (Disarming) Reporting Codes (Section 5.8 “Communicator – Reporting Co...

      42
      • I_______I_______I 1. Opening by Duress Code 33 I_______I_______I 5. Opening by Supervisory Code 42

        42
      • I_______I_______I 2. Opening by Duress Code 34 I_______I_______I 6. Auto Arm Cancellation

        42
      • I_______I_______I 3. Opening by Master Code 40 I_______I_______I 7. Special Opening

        42
      • I_______I_______I 4. Opening by Supervisory Code 41

        42
    • [349] Maintenance Alarm Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on pg. 17, ...

      42
      • I_______I_______I 1. Battery Trouble Alarm I_______I_______I 5. Auxiliary Power Supply Trouble Alarm

        42
      • I_______I_______I 2. AC Failure Trouble Alarm I_______I_______I 6. TLM Trouble Code (via LINKS)

        42
      • I_______I_______I 3. Bell Circuit Trouble Alarm I_______I_______I 7.General System Trouble

        42
      • I_______I_______I 4. Fire Trouble Alarm I_______I_______I 8. General System Supervisory

        42
    • [350] Maintenance Restoral Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on pg. 1...

      42
      • I_______I_______I 1. Battery Trouble Restoral I_______I_______I 5. Auxiliary Power Supply Trouble...

        42
      • I_______I_______I 2. AC Failure Trouble Restoral I_______I_______I 6. TLM Restoral

        42
      • I_______I_______I 3. Bell Circuit Trouble Restoral I_______I_______I 7. General System Trouble Re...

        42
      • I_______I_______I 4. Fire Trouble Restoral I_______I_______I 8. General System Supervisory Restore

        42
    • [351] Miscellaneous Maintenance Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on ...

      42
      • I_______I_______I 1. Telephone Number 1 FTC Restore I_______I_______I 5. DLS Lead OUT

        42
      • I_______I_______I 2. Telephone Number 2 FTC Restore I_______I_______I 6. Zone Fault Alarm

        42
      • I_______I_______I 3. Event Buffer 75% Full Since Last Upload I_______I_______I 7. Zone Fault Restore

        42
      • I_______I_______I 4. DLS Lead IN I_______I_______I 8. Delinquency Code

        42
    • [352] Test Transmission Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on pg. 17, ...

      42
      • I_______I_______I 1. Periodic Test Transmission I_______I_______I 3. LINKS1000 Test Transmission ...

        42
      • I_______I_______I 2. System Test

        42
      • *The LINKS Test Transmission Code must be programmed as “00” for the LINKS Test Transmission to b...

        42
    • [353] Wireless Maintenance Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on pg. 1...

      42
      • I_______I_______I 1. Wireless Device Low Battery Alarm I_______I_______I 2. Wireless Device Low B...

        42
    • [360] Communicator Format Options (Section 5.9 “Communicator – Reporting Formats” on page 18)

      42
    • Default

      42
      • 02 I_______I_______I 1st/3rd Telephone Number

        42
      • 02 I_______I_______I 2nd Telephone Number

        42
      • 01 20 BPS, 1400 HZ handshake 04 SIA FSK

        42
      • 02 20 BPS, 2300 HZ handshake 05 Pager

        42
      • 03 DTMF CONTACT ID

        42
      • [361] Alarm/Restore Communicator Call Directions (Section 5.5 “Communicator – Dialing” on page 17)

        42
    • Default Option ON OFF

      42
      • ON I_______I 1 1st Telephone Number Disabled

        42
      • OFF I_______I 2 2nd Telephone Number Disabled

        42
      • OFF I_______I 3 1st Telephone Number (via LINKS) Disabled

        42
      • OFF I_______I 4 2nd Telephone Number (via LINKS) Disabled

        42
      • OFF I_______I 5-8 For future use

        42
      • [363] Tamper/Restore Communicator Call Directions (Section 5.5 “Communicator – Dialing” on page 17)

        42
    • Default Option ON OFF

      42
      • ON I________I 1 1st Telephone Number Disabled

        42
      • OFF I________I 2 2nd Telephone Number Disabled

        42
      • OFF I________I 3 1st Telephone Number (via LINKS) Disabled

        42
      • OFF I________I 4 2nd Telephone Number (via LINKS) Disabled

        42
      • OFF I________I 5-8 For future use

        42
      • [365] Opening/Closing Communicator Call Directions (Section 5.5 “Communicator – Dialing” on page 17)

        43
    • Default Option ON OFF

      43
      • ON I________I 1 1st Telephone Number Disabled

        43
      • OFF I________I 2 2nd Telephone Number Disabled

        43
      • OFF I________I 3 1st Telephone Number (via LINKS) Disabled

        43
      • OFF I________I 4 2nd Telephone Number (via LINKS) Disabled

        43
      • OFF I________I 5-8 For future use

        43
      • [367] System Maintenance Alarm/Restore Communicator Call Directions (Section 5.5 “Communicator – ...

        43
    • Default Option ON OFF

      43
      • ON I________I 1 1st Telephone Number Disabled

        43
      • OFF I________I 2 2nd Telephone Number Disabled

        43
      • OFF I________I 3 1st Telephone Number (via LINKS) Disabled

        43
      • OFF I________I 4 2nd Telephone Number (via LINKS) Disabled

        43
      • OFF I________I 5-8 For future use

        43
      • [368] System Test Transmissions Communicator Call Directions (Section 5.5 “Communicator – Dialing...

        43
    • Default Option ON OFF

      43
      • ON I________I 1 1st Telephone Number Disabled

        43
      • OFF I________I 2 2nd Telephone Number Disabled

        43
      • OFF I________I 3 1st Telephone Number (via LINKS) Disabled

        43
      • OFF I________I 4 2nd Telephone Number (via LINKS) Disabled

        43
      • OFF I________I 5-8 For future use

        43
      • [370] Communication Variables

        43
    • Default Section Page #

      43
      • 003 I_______I_______I_______I Swinger Shutdown (Alarms and Rest) (001-014 Transmissions, 000=disa...

        43
      • 003 I_______I_______I_______I Swinger Shutdown (Tampers and Rest) (001-014 Transmissions, 000=dis...

        43
      • 003 I_______I_______I_______I Swinger Shutdown (Maint and Rest) (001-014 Transmissions, 000=disab...

        43
      • 000 I_______I_______I_______I Transmission Delay (001-255 seconds) 5.15 23

        43
      • 030 I_______I_______I_______I AC Failure Communication Delay (001-255 minutes) 5.8 17

        43
      • 003 I_______I_______I_______I TLM Trouble Delay (No. of checks required - valid entries 003 - 255...

        43
      • 030 I_______I_______I_______I Test Transmission Cycle (land line) (001-255 days) 5.14 23

        43
      • 030 I_______I_______I_______I Test Transmission Cycle (LINKS) (001-255 days) 5.14 23

        43
      • 007 I_______I_______I_______I Zone Low Battery Transmission Delay (000-255 days) 5.8 17

        43
      • 030 I_______I_______I_______I Delinquency Transmission Cycle (000-255 days/hours) 5.8 17

        43
      • [371] Test Transmission Time of Day (Section 5.14 “Test Transmission” on page 23)

        43
    • Default

      43
      • 9999 I_______I_______I_______I_______I (Valid entries are 0000-2359, 9999 to disable)

        43
      • [380] First Communicator Option Code

        43
    • Default Option ON OFF Section Page #

      43
      • ON I_______I 1 Communications Enabled Communications Disabled 5.5 17

        43
      • OFF I_______I 2 Restorals on Bell Time-out Restorals Follow Zones 5.8 17

        43
      • OFF I_______I 3 Pulse Dialing DTMF Dialing 5.5 17

        43
      • ON I_______I 4 Switch to Pulse Dialing on 5th Attempt DTMF Dial For All Attempts 5.5 17

        43
      • OFF I_______I 5 3rd Telephone Number enabled 3rd Telephone Number disabled 5.7 17

        43
      • OFF I_______I 6 Alternate Dial (1st and 3rd) Call 1st Number, Backup to 3rd 5.7 17

        43
      • OFF I_______I 7 Call LINKS as well as Land Line LINKS is Backup of Land Line(s) 5.26 25

        43
      • OFF I_______I 8 Delinquency Follows Zone Activity (Hours) Delinquency Follows Arming (Days) 5.8 17

        43
      • [381] Second Communicator Option Code

        44
    • Default Option ON OFF Section Page #

      44
      • OFF I_______I 1 Open After Alarm Kypd Ringback enabled Open After Alrm Kypd Ringback disabled 5.1...

        44
      • OFF I_______I 2 Open After Alarm Bell Ringback enabled Open After Alrm Bell Ringback disabled 5.1...

        44
      • OFF I_______I 3 SIA Sends Programmed Rep. Codes SIA Sends Automatic Rep. Codes 5.9 18

        44
      • OFF I_______I 4 Closing Confirmation Enabled Closing Confirmation Disabled 5.17 23

        44
      • ON I_______I 5 Talk/Listen (PC5928) on phone lines 1/3 No Talk/Listen (PC5928) on phone lines 1/3...

        44
      • OFF I_______I 6 Talk/Listen (PC5928) on phone line 2 No Talk/Listen (PC5928) on phone line 2 5.7 17

        44
      • ON I_______I 7 Contact ID Uses Programmed Rep. Codes Contact ID Uses Automatic Rep. Codes 5.9 18

        44
      • OFF I_______I 8 For future use —

        44
      • [390] LINKS Preamble (First Telephone Number) (Section 5.26 “LINKS1000 Cellular Communicator*” on...

        44
        • Default: FFFF I_______I_______I_______I_______I (Program all unused digits with Hex F)

          44
      • [391] LINKS Preamble (Second Telephone Number) (Section 5.26 “LINKS1000 Cellular Communicator*” o...

        44
        • Default: FFFF I_______I_______I_______I_______I (Program all unused digits with Hex F)

          44
      • [392] LINKS Preamble (Third Telephone Number) (Section 5.26 “LINKS1000 Cellular Communicator*” on...

        44
        • Default: FFFF I_______I_______I_______I_______I (Program all unused digits with Hex F)

          44
      • [393] LINKS Special Function Preamble (All Telephone Numbers) (Section 5.26 “LINKS1000 Cellular C...

        44
        • Default: FFFFFF I_______I_______I_______I_______I_______I_______I (Program all unused digits with...

          44
        • •Enter [*][2][*] (HEX B) to dial [*] • Enter [*][3][*] (HEX C) to dial [#]

          44
  • Downloading Options

    44
    • [401] First Downloading Option Code (Section 5.10 “Downloading” on page 20)

      44
    • Default Option ON Off

      44
      • OFF I_______I 1 Answering machine/double call enabled Answering machine/double call disabled

        44
      • ON I_______I 2 User Can Enable DLS Window User Cannot Enable DLS Window

        44
      • OFF I_______I 3 Call-Back Enabled Call-Back Disabled

        44
      • OFF I_______I 4 User-initiated call-up enabled User-initiated call-up disabled

        44
      • OFF I_______I 5-8 For future use

        44
      • [402] Downloading Computer’s Telephone Number (32 Digits) (Section 5.10 “Downloading” on page 20)

        44
        • I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

          44
      • [403] Downloading Access Code (Section 5.10 “Downloading” on page 20)

        44
        • Default: 5008 I_______I_______I_______I_______I Enter 4 HEX digits

          44
      • [404] Panel Identification Code (Section 5.10 “Downloading” on page 20)

        44
        • Default: 5008 I_______I_______I_______I_______I Enter 4 HEX digits

          44
      • [405] Answering Machine Double-call Timer (Section 5.10 “Downloading” on page 20)

        44
        • Default: 060 I_______I_______I_______I (Valid entries are 001-255 seconds)

          44
      • [406] Number of Rings to Answer On (Section 5.10 “Downloading” on page 20)

        44
        • Default: 000 I_______I_______I_______I (Valid entries are 000-255 rings)

          44
      • [490] LINKS Preamble (Downloading Telephone Number) (Section 5.10 “Downloading” on page 20)

        44
        • Default: FFFF I_______I_______I_______I_______I (Program all unused digits with Hex F)

          44
      • [499] [Installer’s Code] [499] Initiate PC-Link (Local Downloading) (Section 5.10 “Downloading” o...

        44
  • International Programming

    45
    • [701] First International Options Code

      45
    • Default Option ON Off Section Page #

      45
      • OFF I_______I 1-4 For Future Use

        45
      • OFF I_______I 5 6-Digit User Access Codes 4-Digit User Access Codes 5.1 15

        45
      • OFF I_______I 6 Busy tone detection enabled Busy tone detection disabled 5.5 17

        45
      • OFF I_______I 7-8 For Future Use

        45
  • Module Programming

    45
    • [801] PC5400 Printer Module Programming

      45
      • Please refer to your PC5400 Installation Manual for installation and programming instructions.

        45
    • [802] PC59XX Audio Interface Programming

      45
      • Please refer to your PC59XX Installation Manual for installation and programming instructions.

        45
    • [803] Alternative Communicator Programming*

      45
      • Please refer to your LINKS2X50, Skyroute Installation Manual for installation and programming ins...

        45
    • [804] PC5132 Wireless Expansion Programming

      45
      • Please refer to your PC5132 Installation Manual for programming locations and instructions.

        45
  • Special Installer Functions

    45
    • [901] Installer Walk Test Mode Enable / Disable (Section 5.30 “Walk Test (Installer)” on page 26)

      45
    • [902] Module Supervision Reset (Section 2.8 “Removing Modules” on page 5)

      45
    • [903] Module Supervision Field (Section 2.7 “Supervision” on page 5)

      45
    • [904] Wireless Module Placement Test

      45
      • For more information, please refer to your PC5132 Installation Manual

        45
    • Placement Led Keypad LCD Keypad Bell / Buzzer

      45
      • Good Light 1 ON Steady “GOOD” 1 Beep / Squawk

        45
      • Fair Light 2 ON Steady “FAIR” 2 Beeps / Squawks

        45
      • Bad Light 3 ON Steady “BAD” 3 Beeps / Squawks

        45
      • [990] Installer Lockout Enable (Section 5.29 “Installer’s Lockout” on page 26)

        45
      • [991] Installer Lockout Disable (Section 5.29 “Installer’s Lockout” on page 26)

        45
      • [993] Restore Alternative Communicator to Factory Default Programming (Section 5.28 “Resetting Fa...

        45
      • [995] Restore Escort5580 to Factory Default Programming (Section 5.28 “Resetting Factory Defaults...

        45
      • [996] Restore PC5132 to Factory Default Programming (Section 5.28 “Resetting Factory Defaults*” o...

        45
      • [997] Restore PC5400 to Factory Default Programming (Section 5.28 “Resetting Factory Defaults*” o...

        45
      • [998] Restore PC59XX to Factory Default Programming (Section 5.28 “Resetting Factory Defaults*” o...

        45
      • [999] Restore PC1555MX to Factory Default Programming (Section 5.28 “Resetting Factory Defaults*”...

        45
• Appendix A: Reporting Codes

  46
  • Contact ID

    46
  • *BURG - ENTRY/EXIT - 1

    46
    • SIA Format - Level 2 (Hardcoded)

      46
    • Table2: Contact ID Zone Alarm/Restoral Event Codes (as per ADEMCO):

      47
    • Table 3: SIA Format Automatic Zone Alarm/Restoral Codes

      47
• Appendix B: Programming LCD Keypads

  48
  • If you have an LCD5500Z Keypad, additional programming is required for proper operation. The foll...

    48
  • How to Enter LCD Programming

    48
    • Follow the programming procedure as outlined in Section 4 by pressing [*][8][Installer’s Code]. P...

      48
  • Programmable Labels – Sections [01] - [08], [33], [34], [40], [44], [51], [52]

    48
    • Zone labels and other LCD display identifiers can be customized to make operation of the system e...

      48
    • [1] - A, B, C, 1 [2] - D, E, F, 2 [3] - G, H, I, 3 [4] - J, K, L, 4 [5] - M, N, O, 5

      48
    • [6] - P, Q, R, 6 [7] - S, T, U, 7 [8] - V, W, X, 8 [9] - Y, Z, 9,0 [0] - Space

      48
  • [01] to [32] Zone Labels (14 Characters)

    48
    • Default: “Zone 1” - “Zone 32”

      48
    • Record zone labels on page 28

      48
  • [33] Fire Alarm Label (14 Characters)

    48
    • Default: “Fire Zone” I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I___...

      48
  • [34] System Label (14 Characters)

    48
    • Default: “System” I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

      48
  • [40] to [48] [*][7][1-4] Command Output Option Labels (14 Characters)

    48
    • [40] Default: “Command O/P 1” I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

      48
    • [44] Default: “Command O/P 2” I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

      48
    • [46] Default: “Command O/P 3” I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

      48
    • [48] Default: “Command O/P 4” I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

      48
  • [51] Fail to Arm Event Message

    48
    • Default: “System Has Failed to Arm” I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

      48
  • [52] Alarm When Armed Event Message

    48
    • Default: “Alarm Occurred While Armed < >” I_____I_____I_____I_____I_____I_____I_____I_____I_____I...

      48
  • [60] First User Display Mask

    48
  • Default Option ON OFF

    48
    • ON I_______I 1 Hold [P]anic Keys prompt ON Hold [P]anic Keys prompt OFF

      48
    • ON I_______I 2 Zone Bypassing prompt ON Zone Bypass prompt OFF

      48
    • ON I_______I 3 Troubles prompt ON Troubles prompt OFF

      48
    • ON I_______I 4 Alarm Memory prompt ON Alarm Memory prompt OFF

      48
    • ON I_______I 5 Door Chime Control prompt ON Door Chime Control prompt OFF

      48
    • ON I_______I 6 Access Codes prompt ON Access Codes prompt OFF

      48
    • ON I_______I 7 User Functions prompt ON User Functions prompt OFF

      48
    • ON I_______I 8 Output Control prompt ON Output Control prompt OFF

      48
  • [61] Second User Display Mask

    49
  • Default Option ON OFF

    49
    • OFF I_______I 1 Installer Programming prompt ON Installer Programming prompt OFF

      49
    • ON I_______I 2 Stay Arm prompt ON Stay Arm prompt OFF

      49
    • ON I_______I 3 Quick Arm prompt ON Quick Arm prompt OFF

      49
    • ON I_______I 4 Interior Arm prompt ON Interior Arm prompt OFF

      49
    • OFF I_______I 5 Quick Exit prompt ON Quick Exit prompt OFF

      49
    • ON I_______I 6 View Event Buffer prompt ON View Event Buffer prompt OFF

      49
    • OFF I_______I 7 For future use

      49
    • OFF I_______I 8 Music Input ON Music Input OFF

      49
  • [62] Third User Display Mask

    49
  • Default Option ON OFF

    49
    • ON I_______I 1 System Test prompt ON System Test prompt OFF

      49
    • ON I_______I 2 Time and Date prompt ON Time and Date prompt OFF

      49
    • ON I_______I 3 Auto-Arm Control prompt ON Auto-Arm Days prompt OFF

      49
    • ON I_______I 4 Auto-Arm Time prompt ON Auto-Arm Time prompt OFF

      49
    • ON I_______I 5 Download Enable prompt ON Download Enable prompt OFF

      49
    • ON I_______I 6 Bright Control prompt ON Bright Control prompt OFF

      49
    • ON I_______I 7 Contrast Control prompt ON Contrast Control prompt OFF

      49
    • ON I_______I 8 Buzzer Control prompt ON Buzzer Control prompt OFF

      49
  • [63] Downloaded LCD Message Duration

    49
    • Default: 003 I_______I_______I_______I (Valid entries are 000-255, 000=Unlimited Message Display....

      49
  • [64] Key Options

    49
  • Default Option ON OFF

    49
    • ON I_______I 1 [F]ire Keys enabled [F]ire Keys disabled

      49
    • ON I_______I 2 [A]uxiliary Keys enabled [A]uxiliary Keys disabled

      49
    • ON I_______I 3 [P]anic Keys enabled [P]anic Keys disabled

      49
    • OFF I_______I 4-8 For future use

      49
  • [65] Fourth User Display Mask

    49
  • Default Option ON OFF

    49
    • ON I_______I 1 User Initiated Call-up Prompt ON User Initiated Call-up Prompt OFF

      49
    • OFF I_______I 2 For future use

      49
    • OFF I_______I 3 For future use

      49
    • ON I_______I 4 Command Output #1 prompt ON Command Output #1 prompt OFF

      49
    • ON I_______I 5 Command Output #2 prompt ON Command Output #2 prompt OFF

      49
    • OFF I_______I 6 Command Output #3 prompt ON Command Output #3 prompt OFF

      49
    • OFF I_______I 7 Command Output #4 prompt ON Command Output #4 prompt OFF

      49
    • OFF I_______I 8 For future use

      49
  • [66] Keypad Options

    49
  • Default Option ON OFF

    49
    • ON I_______I 1 Display Access Code when Programming Display ‘X’ when Programming

      49
    • ON I_______I 2 Local Clock Display Enabled Local Clock Display Disabled

      49
    • OFF I_______I 3 Local Clock Displays 24 Hour time Local Clock Displays AM/PM

      49
    • ON I_______I 4 Auto Alarm Memory Scroll Enabled Auto Alarm Memory Scroll Disabled

      49
    • OFF I_______I 5 Local Display of Temperature Enabled Local Display of Temperature Disabled

      49
    • OFF I_______I 6-8 For future use

      49
  • [67] Fifth User Display Mask

    50
  • Default Option ON OFF

    50
    • OFF I_______I 1 Thermostat CTRL Prompt ON Thermostat CTRL Prompt OFF

      50
    • OFF I_______I 2 Temperature Setting Prompt ON Temperature Setting Prompt OFF

      50
    • OFF I_______I 3 Occupancy Mode Prompt ON Occupancy Mode Prompt OFF

      50
    • OFF I_______I 4 Thermostat Mode Prompt ON Thermostat Mode Prompt OFF

      50
    • OFF I_______I 5 Fan Control Prompt ON Fan Control Prompt OFF

      50
    • OFF I_______I 6 For Keypad View Prompt ON For Keypad View Prompt OFF

      50
    • Off I_______I 7-8 For future use

      50
  • [68] Sixth User Display Mask

    50
  • Default Option ON OFF

    50
    • OFF I_______I 1 Occupancy Mode Auxiliary Prompt ON Occupancy Mode Auxiliary Prompt OFF

      50
    • OFF I_______I 2 Occupancy Mode Day Prompt ON Occupancy Mode Day Prompt OFF

      50
    • OFF I_______I 3 Occupancy Mode Away Prompt ON Occupancy Mode Away Prompt OFF

      50
    • OFF I_______I 4 Occupancy Mode Night Prompt ON Occupancy Mode Night Prompt OFF

      50
    • Off I_______I 5-8 For future use

      50
  • [97] View Software Version

    50
  • [98] Initiate Global Label Broadcast

    50
    • All LCD programming is done per keypad. If more than one LCD keypad are present on the system, an...

      50
    • Step 1 - Program one LCD keypad completely.

      50
    • Step 2 - Make sure all LCD keypads are connected to the Keybus.

      50
    • Step 3 - Enter Installer’s Programming, then enter Section [98] at the keypad that was programmed...

      50
  • [99] Reset LCD EEPROM to Factory Defaults

    50
    • ASCII Characters

      50
  • UL Listed Commercial and Residential Installations

    50
    • Grade A Local

      50
    • Grade B Central Station and Police Connect

      50
    • Grade C Central Station

      50
    • All Commercial Installations

      50
    • Residential Installations

      50
    • Programming

      50
    • Control of the Protected Premises

      50
    • Bell Location

      50
    • Protection of the Control Unit

      50
    • Casual Users

      50
    • User Information

      50
  • Changes for PC1555MX v2.3

    52
    • Number of Zones

      52
    • New Options & Features

      52
    • New Downloading Software

      52
    • Default Changes

      52
    • PC1555MX Module Compatibility

      52