Manual Do Utilizadoríndice analíticoBEFORE YOU BEGIN...................................................................................…. 12IMPORTANT SAFETY NOTICES..................................................................…. 22HARDWARE PACK……….....…....................................................................…. 42ASSEMBLY INSTRUCTIONS........................................................................…. 62EXPLODED DIAGRAM………………………………………………………………. 112PARTS LIST...................................................................................................… 122OPERATING NOTES………………………………………………………………… 132WARRANTY.................................................................................................…. 172ORDERING PARTS.....................................................................................….. 172Carriage Bolt M8 x 2 3/8”5Curved Washer Ø 5/8”5M8 Acorn Nut5Allen Bolt M8 x 5/8“5A.) Attach the Handle (#5) to the Front Post (#4). Secure it with one Bracket (#30), one M8 x ¾” Allen Bolt (#19), and one T-shaped Lock Knob (#26).9B.) Connect Upper Computer Wire (#28) from Computer (#6) to the Middle Computer Wire (#21) from Front Post.9C.) Remove the two M5 x 3/8” Philips Screws (#29) from Computer. Slide the Computer onto the bracket on Front Post. Secure it with the two Screws.9A.) Remove the three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14) from the Seat (#8).10B.) Attach the Seat to the Seat Post (#7). Secure it with three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14).10C.) Insert the Seat Post into the opening on Main Frame (#1). Thread the Lock Knob (#11) through the hole on Seat Post to securely lock it at selected height.10MUSCLE TONING17WEIGHT LOSS17Tamanho: 1 MBPáginas: 18Language: EnglishAbrir o manual