Manuais de utilizador para Jet horizontal wet band saw - 7" x 12" - 3

índice analítico

• J-3410 Band Saw

  1
• Warranty and Service

  2
• Table of Contents

  3
• General Specifications

  4
• Warning

  5
• Operating Instructions

  7
  • Using the vise

    7
  • Locking vise jaw

    7
  • Changing the locking jaw location

    8
  • Stationary vise jaw

    8
  • Changing the stationary vise jaw position

    8
  • Adjusting stationary jaw: straight cuts

    8
  • Adjusting stationary jaw: angle cuts

    8
  • Adjusting angles with the scale on the saw table

    9
  • Adjusting stationary jaw for high accuracy angle cutting

    9
  • Setting the blade guides

    9
  • Controlling the cut: Hydraulic feed control

    10
  • Using the stock stop for repeated cuts

    10
  • Changing blade speeds

    11
  • Blade selection

    11
  • Evaluating cutting efficiency

    11
  • Blade break-in procedures

    11
  • Starting a cut

    11
  • Right angle cuts -- single pieces of stock

    12
  • Angle cutting

    12
• Maintenance

  14
  • Replacing blades

    14
  • Adjusting blade tracking

    14
  • Blade alignment adjustments

    15
  • When to adjust the blade guides

    15
  • Replacing blade guide and support components

    16
  • Adjusting blade vertical

    17
  • Test cutting to verify adjustment accuracy

    17
  • Adjusting guide bearings

    18
  • Replacing guide bearings

    18
  • Adjusting blade back-up bearings

    18
  • Replacing the drive wheel

    19
  • Installing the vertical sawing table

    19
  • Replacing idler wheel or bearings

    19
  • Servicing the hydraulic control cylinder

    20
• Machine Set-up

  21
  • Uncrating and spottingthe saw

    21
  • Electrical

    21
  • To change the operating voltage

    21
  • Installing the coolant kit

    22
  • Chip brush replacement

    22
  • Adjusting the horizontal stop and motor switch

    22
  • To replace or adjust the horizontal stop

    22
  • Adjusting the motor switch actuator

    22
• Troubleshooting

  23
• Replacement Parts

  25
  • Exploded View - Saw Head

    26
  • Parts List - Saw Head

    27
  • Exploded View - Saw Base

    28
  • Parts List - Saw Base

    29
  • Parts List - Hydraulic Cylinder

    30