Manual Do Utilizadoríndice analíticoMaster TOC6Safety2Section A Installation7Section B Operation15Section C Accessories23Section D Maintenance33Section E Theory of Operation37Section F Troubleshooting and Repair43Symptoms46Major physical or electrical damage is evident.46The machine is dead - the input contactor does not operate. The pilot light is not lit.46The input contactor operates, but no welding output. The 115 VAC auxiliary supply is present at the receptacle.46The input contactor chatters.47The machine is dead - the input contactor does not operate. The pilot light is lit.47The machine has welding output but no control.48The machine does not have maximum output.48The 115 VAC receptacle is not working. The machine’s welding output is normal.49When not welding for a period of time, the machine shuts down.49The output control potentiometer does not function when the output control switch (SW3) is in the...50The remote output control unit does not function properly when the output control switch (SW3) is...50The Thermal Protection Light is on but the fan does not run.51The fan runs continuously.51One or both of the optional digital meters are not lit.51The optional digital meter is not working properly and/or the display is erratic.52The analog meters are not reading correctly.52Poor arc characteristics in all processes.53Poor arc striking with semiautomatic or automatic wire feeders.53The arc is variable or sluggish.54The Arc Force Control (R4) has no effect on the arc.54Section G - Electrical Diagrams101Tamanho: 2 MBPáginas: 109Language: EnglishAbrir o manual