Manual Do Utilizadoríndice analíticoMaster Table of Contents6Safety2Section A - Installation7Section B - Operation19Section C - Accessories25Section D - Maintenance29Section E - Theory of Operation35Section F - Troubleshooting and Repair41Symptoms44Major Physical or Electrical Damage is Evident.44No weld output and no auxiliary power. Engine runs normally.44No weld output, the auxiliary power (230-115VAC) is operating normally. Engine runs normally.45No auxiliary power, welding output is normal. Engine runs normally.46Machine has low welding output and low auxiliary output.47No DC welding output. AC welding output and auxiliary power is normal.48No AC welding output. DC welding output and auxiliary power is normal.48No constant voltage (CV) welding output. Constant current (CC) and the auxiliary power are operating normally.49Engine will not idle down to low speed. Machine has normal weld output and auxiliary power.50Engine will not go to high idle when attempting to weld. Welding output is normal when Idler Switch is in “HIGH” position. Automatic idle function works properly when the auxiliary power is loaded.51Engine will not go to high idle when attempting to weld or when the auxiliary power is loaded. Welding output and auxiliary power output is normal when Idler Switch is in the “HIGH” position.51Engine will not crank or cranks very slow.52The Engine shuts off.52Engine does not develop full power.52The welding arc is “cold.” Engine runs normally (3700 RPM no load). Auxiliary power is functioning normally.53Section G - Electrical Diagram105Tamanho: 1 MBPáginas: 116Language: EnglishAbrir o manual