Manual Do Utilizadoríndice analíticoMaster TOC6Safety2Section A Installation7Section B Operations15Section C Accessories23Section D Maintenance31Section E Theory Of Operation35Section F Troubleshooting & Repair41Symptoms44Major physical or electrical damage is evident when the sheet metal cover(s) are removed.44Machine is dead - no output - no fan - no pilot light.44The machine is dead - no output -no fan - the pilot light is on.44The input contactor operates - the fan runs - the pilot light is on - but the machine has no welding output.45The input contactor (CR1) chatters.45The machine has high welding output and no control.46The machine has minimum (or very low) welding output and no control.46The machine does not have maximum output.47The machine will not shut off when the power switch is put in the OFF position.47The output terminals are always electrically “hot.”48Poor arc characteristics.49Poor arc striking with semiautomatic or automatic wire feeders.49The welding arc is variable and sluggish.49Tamanho: 1 MBPáginas: 102Language: EnglishAbrir o manual