Manuais de utilizador para Lorex lh314

índice analítico

• NOTE: Some systems may include a Documentation CD. Only the Instruction Manual and Quick Start Guide are included on this CD.

  2
• ATTENTION: Before attempting to connect locally or remotely (over the Internet), you must have a router in order to network the system.

  2
  • 1. Press the button twice on the remote control to open the System Information screen on the DVR. Under LAN, find the IP address of your system.

    2
  • 2. On your PC, click Start and select Run. In the Run window, enter cmd and click OK. The Command Prompt window opens.

    2
  • 3. Type ipconfig and press Enter. Your network information appears (see figure). You may need to enter some of this information in your system’s LAN settings.

    3
• The third set of numbers from the IP address should match those in the IP address of your PC.

  3
• In this example, our PC shows 11, and our DVR show 1. Therefore, we need to edit the IP address and Gateway information on the DVR.

  3
  • 4. Check that the third set of numbers of the IP address in the IP config window and your system’s System Information screen are...

    3
  • 5. On the system, click to open the Main Menu. Click LAN.

    3
  • 6. Under IP, select the third field (001) and enter the third set of numbers from the IP address in the Command Prompt window. U...

    3
  • NOTE: The third set of numbers in IP and Gateway in your LAN settings MUST MATCH the third set of numbers in IP address and Defa...

    3
  • NOTE: In this example, we changed the default digit from 001 to 011 in order to match the IP address and Default Gateway in ipconfig.

    3
    • 7. Press the button twice on the remote control to open the System Information screen on the DVR. Confirm that your changes have been saved.

      4
  • NOTE: We strongly recommend registering for Lorex’s free DDNS service prior to using remote viewing. For more details on registering for DDNS service, please refer to "Setting Up DDNS Service" in Appendix B of the system’s instruction Manual.

    4
    • 1. Open Internet Explorer (version 6 or above) and enter the IP address of your DVR in the address bar (i.e. 192.168.xxx.89). DVR Netviewer opens.

      4
    • 2. Login using your LAN user ID and password (by default, ID 9; password 3333). Click . The Setup menu opens.

      4
    • 3. Under Network, click DDNS.

      4
• Figure 25.3 DDNS setup in DVR Netviewer

  5
  • 4. Under DDNS Select, click the drop-down menu and select http://lorexddns.net

    5
  • 5. In the corresponding text fields, enter your DDNS username and password.

    5
  • NOTE: Obtain this information from the confirmation email after registering for the free Lorex DDNS service.

    5
    • 6. Under DDNS Domain Name, enter only the first portion of your DDNS domain from the confirmation email. For example, if your domain name is tomsmith@lorexddns.net, you only need to enter tomsmith in the text field.

      5
    • 7. Click Submit to save your settings or click Cancel to exit without saving.

      5
    • 8. You must reset your DVR in order for the changes to take effect. Disconnect and reconnect the power cable from the rear panel to reset.

      5
  • NOTE: Please allow 10~15 minutes for the DDNS servers to update with your new URL. This is normal for a DDNS system.

    5
  • NOTE: The PC used for remote viewing requires Internet Explorer 6 or later and QuickTime. QuickTime must be configured to the necessary settings.

    5
    • 1. Using a remote PC, open Internet Explorer.

      6
    • 2. In the address bar, enter your DDNS URL.

      6
  • NOTE: Obtain your DDNS URL from your confirmation email.

    6
    • 3. Enter your LAN ID and password to log in to your system (by default, admin ID: 9; password 3333).

      6
  • NOTE: If you are having problems connecting using DDNS, check that you have port forwarded ports 80 and 8090 on your router.

    6