Manuais de utilizador para Seagate 300 GB Hard Disk

índice analítico

• 1.0 Introduction 1

  5
• 2.0 Drive specifications 3

  5
  • 2.1 Specification summary tables 3

    5
  • 2.2 Formatted capacity 12

    5
    • 2.2.1 LBA mode 12

      5
  • 2.3 Default logical geometry 12

    5
  • 2.4 Recording and interface technology 13

    5
  • 2.5 Physical characteristics 13

    5
  • 2.6 Seek time 13

    5
  • 2.7 Start/stop times 14

    5
  • 2.8 Power specifications 15

    5
    • 2.8.1 Power consumption 15

      5
    • 2.8.2 Conducted noise 18

      5
    • 2.8.3 Voltage tolerance 18

      5
    • 2.8.4 Power-management modes 18

      5
  • 2.9 Environmental specifications 19

    5
    • 2.9.1 Ambient temperature 19

      5
    • 2.9.2 Temperature gradient 19

      5
    • 2.9.3 Humidity 19

      5
    • 2.9.4 Altitude 19

      5
    • 2.9.5 Shock 20

      5
    • 2.9.6 Vibration 20

      5
  • 2.10 Acoustics 21

    5
  • 2.11 Electromagnetic immunity 22

    5
  • 2.12 Reliability 23

    5
    • 2.12.1 Annualized Failure Rate (AFR and Mean Time Between Failures (MTBF) 23

      5
  • 2.13 Agency certification 23

    5
    • 2.13.1 Safety certification 23

      5
    • 2.13.2 Electromagnetic compatibility 23

      5
    • 2.13.3 FCC verification 24

      5
  • 2.14 Environmental protection 25

    5
    • 2.14.1 European Union Restriction of Hazardous Substances (RoHS) 25

      5
  • 2.15 Corrosive environment 25

    5
• 3.0 Configuring and mounting the drive 27

  5
  • 3.1 Handling and static discharge precautions 27

    5
  • 3.2 Breather filter hole precautions 28

    5
  • 3.3 Jumper settings 29

    5
    • 3.3.1 Master/slave configuration 29

      5
    • 3.3.2 Cable select option 29

      5
    • 3.3.3 Ultra ATA/100 cable 30

      5
  • 3.4 Drive mounting 30

    5
• 4.0 ATA interface 33

  5
  • 4.1 ATA interface signals and connector pins 33

    5
    • 4.1.1 Supported ATA commands 34

      5
    • 4.1.2 Identify Device command 36

      5
    • 4.1.3 Set Features command 39

      5
    • 4.1.4 S.M.A.R.T. commands 40

      5
• 5.0 Maxtor support services 41

  5
• 1.0 Introduction

  9
• 2.0 Drive specifications

  11
  • 2.1 Specification summary tables

    11
  • 2.2 Formatted capacity

    20
    • 2.2.1 LBA mode

      20
  • 2.3 Default logical geometry

    20
  • 2.4 Recording and interface technology

    21
  • 2.5 Physical characteristics

    21
  • 2.6 Seek time

    21
  • 2.7 Start/stop times

    22
  • 2.8 Power specifications

    23
    • 2.8.1 Power consumption

      23
      • 2.8.1.1 Typical current profile

        25
    • 2.8.2 Conducted noise

      26
    • 2.8.3 Voltage tolerance

      26
    • 2.8.4 Power-management modes

      26
  • 2.9 Environmental specifications

    27
    • 2.9.1 Ambient temperature

      27
    • 2.9.2 Temperature gradient

      27
    • 2.9.3 Humidity

      27
      • 2.9.3.1 Relative humidity

        27
      • 2.9.3.2 Wet bulb temperature

        27
    • 2.9.4 Altitude

      27
    • 2.9.5 Shock

      28
      • 2.9.5.1 Operating shock

        28
      • 2.9.5.2 Nonoperating shock

        28
    • 2.9.6 Vibration

      28
      • 2.9.6.1 Operating vibration

        28
      • 2.9.6.2 Nonoperating vibration

        28
  • 2.10 Acoustics

    29
  • 2.11 Electromagnetic immunity

    30
  • 2.12 Reliability

    31
    • 2.12.1 Annualized Failure Rate (AFR and Mean Time Between Failures (MTBF)

      31
  • 2.13 Agency certification

    31
    • 2.13.1 Safety certification

      31
    • 2.13.2 Electromagnetic compatibility

      31
    • 2.13.3 FCC verification

      32
  • 2.14 Environmental protection

    33
    • 2.14.1 European Union Restriction of Hazardous Substances (RoHS)

      33
  • 2.15 Corrosive environment

    33
• 3.0 Configuring and mounting the drive

  35
  • 3.1 Handling and static discharge precautions

    35
  • 3.2 Breather filter hole precautions

    36
  • 3.3 Jumper settings

    37
    • 3.3.1 Master/slave configuration

      37
    • 3.3.2 Cable select option

      37
    • 3.3.3 Ultra ATA/100 cable

      38
  • 3.4 Drive mounting

    38
• 4.0 ATA interface

  41
  • 4.1 ATA interface signals and connector pins

    41
    • 4.1.1 Supported ATA commands

      42
    • 4.1.2 Identify Device command

      44
    • 4.1.3 Set Features command

      47
    • 4.1.4 S.M.A.R.T. commands

      48
• 5.0 Maxtor support services

  49
  • A

    51
  • B

    51
  • C

    51
  • D

    51
  • E

    51
  • F

    51
  • G

    51
  • H

    52
  • I

    52
  • J

    52
  • K

    52
  • L

    52
  • M

    52
  • N

    52
  • O

    52
  • P

    52
  • R

    52
  • S

    53
  • T

    53
  • U

    53
  • V

    53
  • W

    53