Справочник Пользователя для Land Pride rcf3696
38
Section 4: Operating Instructions
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
12/15/15
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
!
CAUTION
!
CAUTION
Inspection of Tractor & Cutter
Make the following inspections with cutter attached to a
tractor, PTO disengaged, and all moving components
completely stopped:
tractor, PTO disengaged, and all moving components
completely stopped:
1.
Park tractor and cutter on a level surface.
2.
Disengage PTO, place gear selector in park, set park
brake, shut tractor off, and remove switch key. Make
sure cutter blades have come to a complete stop
before dismounting from tractor.
brake, shut tractor off, and remove switch key. Make
sure cutter blades have come to a complete stop
before dismounting from tractor.
3.
Inspect tractor safety equipment to make sure it is
installed and in good working condition.
installed and in good working condition.
4.
Inspect cutter safety equipment to make sure it is
installed and in good working condition.
installed and in good working condition.
5.
Check driveline to make certain it is securely
connected to the tractor PTO shaft and cutter
gearbox shaft. Also, make certain that the guards are
in good working condition and in place.
connected to the tractor PTO shaft and cutter
gearbox shaft. Also, make certain that the guards are
in good working condition and in place.
6.
Carefully raise and lower implement to ensure that
the drawbar, tires, and other equipment on the tractor
do not contact cutter frame or driveline.
the drawbar, tires, and other equipment on the tractor
do not contact cutter frame or driveline.
7.
Check all hoses and wires to be sure that they will not
come in contact with rotating driveline.
come in contact with rotating driveline.
8.
With cutter resting on solid supports, PTO
disengaged, and blade rotation completely stopped:
disengaged, and blade rotation completely stopped:
•
Check for and remove foreign objects wrapped
around blade spindles.
around blade spindles.
•
Check for nicked, bent, broken, and worn cutting
blades. Replace or sharpen blades as required.
Refer to “Cutter Blade Maintenance” on page 43.
blades. Replace or sharpen blades as required.
Refer to “Cutter Blade Maintenance” on page 43.
9.
Inspect Hydraulic hoses for wear, damage and
hydraulic leaks. See “Avoid High Pressure Fluids
Hazard” on page 3. Replace damaged and worn
hoses with genuine Land Pride parts.
hydraulic leaks. See “Avoid High Pressure Fluids
Hazard” on page 3. Replace damaged and worn
hoses with genuine Land Pride parts.
The remaining inspections are made by engaging the
PTO to check for normal operation.
PTO to check for normal operation.
!
WARNING