Справочник Пользователя для Philips MP60/70/80/90

Stopping Reports Printouts

♦

To stop Reports printing, in the 

 menu, select 

–

 to stop the current print job 

–

 to cancel all queued report printouts

–

 to toggle to 

 and switch off scheduled reports.

ECG, Vital Signs, Graphic Trends, and Auto Reports settings must be defined in Configuration 
Mode. As the content of context-linked reports, such as Cardiac Output, Calculations, and Wedge, is 
defined by the content of the procedure window, these reports do not need to be set up.

The content you define in the individual 

 menus will be used in all reports of this 

type: for example, if you set a print speed of 50 mm/sec in the 

 menu, every ECG report 

will be printed at this speed, irrespective of format.

The settings you choose in the 

 menu apply for all ECG reports printed. To set up 

ECG Reports, 

Select 

 -> 

 -> 

. Note the report layout configured for 

your monitor, either Internat. or Cabrera. This setting is inactive (“grayed-out”) in Monitoring Mode 
and can only be changed in Configuration Mode. 

Select 

 and set the required ECG Gain to define how ECG waves will appear on the 

ECG report printouts. 

Select 

 and select the report print speed.

Select 

 and toggle to 

 if the printed ECG wave should be annotated with beat 

labels or not. See the chapter on ECG for a list of beat labels. Pace pulse marks are automatically 
printed beside the wave for paced patients.

Alarm Limits Report

Graphic and numeric report of all 
current alarm limits

In the 

 window, select 

Realtime Reports, 
including oxyCRG 
Reports (Neonatal 
Event Review)

patient data and numerics, and either: 
all displayed waves OR all measured 
waves OR all measured RT waves Or all 
measured HiRes waves, OR oxyCRG 
waves (RT waves: ECG Primary lead, 
Pleth, Resp; HiRes waves: btbHR, HiRes 
SpO

2

, HiRes Resp)

Select the 

 SmartKey, if 

configured

Loops Report

Individual Loops diagram with 
timestamp, currently measured numerics

In the Loops window, select 

Battery Report

Battery serial numbers, information on 
the currently-measured and potential 
charge status of the battery or batteries

In the 

window, select 

.