Справочник Пользователя для Impex IGS-01

 
Tools Required Assembling the Machine:  Adjustable Wrench and Allen 
Wrench 
NOTE:  It is strongly recommended this machine to be assembled by two or 
more people to avoid possible injury. 
 
STEP 1     (See Diagram 1) 
A.)  Insert the Handle (#7) into the Handle Grip (#6). Insert the Handle into the 

opening hole on the Left and Right Seat Support (#3) & (#4). 

B.)  Attach the Left and Right Seat Support (#3) & (#4) to the brackets on the Rear 

Stabilizer (#2). Secure each Support with two M10 x ¾” Allen Bolts (#9) and 

∅

 ¾” 

Washers (#8).  DO NOT tighten the bolts yet.  

C.)  Attach the other end of Left and Right Seat Supports to the brackets on the Front 

Stabilizer (#1). Secure each end with two M10 x ¾” Allen Bolts (#9) and 

∅

 ¾” 

Washers (#8). 

D.)  Place the Backrest Pad (#5) on the Left and Right Seat Supports. Secure it with 

four M8 x 3” Allen Bolts (#10) and 

∅

 ½” Washers (#11). 

E.)  Secure tighten all the nuts and bolts previously installed.