Справочник Пользователя для Cateye EC-37OO

34

• After setting your conditions, adapt the earlobe pulse sensor

and depress

button to start program.

• After printing out the conditions, the LCD changes as in the

drawing.

• The hill pattern is shown in the graphic section, and the dot at the

far left is blinking. One dot along the vertical axis indicates 0.5
kg·m, while one along the horizontal axis differs in proportion
with the preset exercise time. If it is 16 minutes for example, one
dot stands for 30 seconds, and if 32 minutes one is 1 minute.

• When the time represented by one dot is over, the dot to the

immediate right will start blinking. With the lapse of time, the
blinking row will move to the right. The position of the blinking
dots determines where you are in the hill pattern.

Note: There is no warm up phase in the "Hill profile training"

program.

TIME 

min:sec

kg·m

TIME 

kg·m

min:sec

watt

kg·m

rpm

• Input pulse limit, exercise time, and the exercise pattern. The

initial display prior to input is as in the drawing. The numeric
for age is blinking.

Initial Value Setting Range

Age

40

10 ~ 99

Pulse Limit

160 bpm

80 ~ 200 bpm

Exercise Time

16 min

16 ~ 99 min

Exercise pattern

1

1 ~

9

• The pitch sound to adjust your cadence at 60 rpm (rings every

half second) is set "OFF".

• The whole hill pattern of the selected number is displayed in the

graphic section.

• You can increase or decrease the blinking numeric by pressing

the

buttons.

• Press the

button to change the blinking numeric.

1

• For program selection see the Starting up section page 18.

2

3

4

• The pedal resistance (torque, kg·m) changes periodically ac-

cording to the exercise pattern.

Remarks: In this program, you can change the pedal resis-

t a n c e   t e m p o r a r i l y   b y   d e p r e s s i n g
either

or

button, whenever desired.

35

• The buzzer sounds at the specified time. The program ends and

the calorie consumption is printed out.

• The LCD returns to the initial screen.

• If you are completely finishing the exercise, be sure to switch

off  the main unit.

Note 1:

There is no cool down phase if you finish Hill pro-

file program at the end of the specified exercise time.

Note 2:

If you press the

button during exercise, the

program enters a 5 minute cool down phase and the pedal
resistance becomes the minimum of 0.5 kg·m. The LCD still
displays the same exercise data. The program ends if the 5
minute cool down phase elapses or if the

 button is

pressed.

TIME 

kg·m

min:sec

watt

kg·m

rpm

5

• Shows that the Hill profile

training program has been
performed.

• Exercise pattern
• Upper limit pulse rate

• Calorie consumption

PRF-1 the Apennines

maximum torque 1.7 kg·m

PRF-2 the Apparachian

maximum torque 2.2 kg·m

PRF-3 the Cascades

maximum torque 2.5 kg·m

PRF-4 the Pyrenees

maximum torque 3.0 kg·m

PRF-5 Mount Fuji

maximum torque 3.7 kg·m

PRF-6 the Rockies

maximum torque 3.5 kg·m

PRF-7 the Alps

maximum torque 3.7 kg·m

PRF-8 the Himalayas

maximum torque 4.0 kg·m

PRF-9 customized pattern

(See page 40.)