Справочник Пользователя для Precor 5.19

Use the SELECT key to choose which feature appears on 
the display. When you enter a program, the display 
automatically scans all highlighted features. 

You can set up the scan feature so only specific information 
appears. To customize the scan feature, switch the indicator 
light off next to the item. If the indicator light is off, the item 
will not appear in the display. The EFX scans between the 
features that are highlighted and skips over the ones that are 
not highlighted.

• Lightly tap the SELECT key until the appropriate indicator 

lights up.You must then press and hold the SELECT key 
for at least two seconds. The indicator light blinks until you 
release the key. During the next scan, the LED lights and 
the associated information appears.

• When the indicator light next to the item is lit, press and 

hold the SELECT key for at least two seconds. The 
indicator light blinks until you release the key. The next 
time the EFX performs a scan, the indicator remains blank 
and the associated information is skipped.