Справочник Пользователя для RCA 19V400TV
24
SECOND AUDIO
PROGRAM (SAP)
PROGRAM (SAP)
1
To display the picture adjust-
ment screen, press the MENU
button. Press the SET + or –
button to select the TV SET-
UP option, then press the
ENTER button.
ment screen, press the MENU
button. Press the SET + or –
button to select the TV SET-
UP option, then press the
ENTER button.
2
Press the MENU button.
Press the SET + or – button to
select the SAP option.
Press the SET + or – button to
select the SAP option.
3
Press the ENTER button to
select the ON position.
select the ON position.
4
Press the MENU button again.
When the TV/VCR is turned on or a channel selection is
made, make certain “SAP” appears on the screen. This
means that the “Second Audio Program” broadcasting is
available.
made, make certain “SAP” appears on the screen. This
means that the “Second Audio Program” broadcasting is
available.
OR
LISTENING TO SAP
Your TV/VCR is fitted with an SAP broadcast system
which enables you to switch to a SECOND AUDIO
PROGRAM when viewing a selected channel.
This function applies only when the program is
broadcast in multi-languages through the SAP
broadcast system.
which enables you to switch to a SECOND AUDIO
PROGRAM when viewing a selected channel.
This function applies only when the program is
broadcast in multi-languages through the SAP
broadcast system.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV on and select the video input mode on the TV.
the TV on and select the video input mode on the TV.
STEREO RECORDING
AND PLAYBACK
AND PLAYBACK
When an MTS STEREO
broadcast is received, the
STEREO will appear on the
screen and the program can
be viewed or recorded in
stereo. The Hi-Fi STEREO
recording procedure is the
same as for normal record-
ings.
broadcast is received, the
STEREO will appear on the
screen and the program can
be viewed or recorded in
stereo. The Hi-Fi STEREO
recording procedure is the
same as for normal record-
ings.
NOTE: When using a CATV system, stereo TV programs
may be transmitted over a mono cable channel.
In this case the word “STEREO” will not appear
and the sound will be in mono.
In this case the word “STEREO” will not appear
and the sound will be in mono.
OUTPUT SELECTION
The VHS Hi-Fi audio system permits high fidelity
recording of MTS STEREO TV broadcasts.
recording of MTS STEREO TV broadcasts.
When viewing an MTS STEREO TV program, or playing
a prerecorded VHS Hi-Fi STEREO videotape, press the
SOUND button to allow the audio to be heard through
both speakers. Normally set to the Hi-Fi STEREO
position, this button can be set to the MONO position if
the stereo broadcast or videotape audio is of poor
quality. The “R” and “L” positions allow the audio from
the Right or Left Hi-Fi channel to be heard over both TV
speakers. This button has no effect when viewing a
MONO videotape or TV program. Each time you press
the button, the OUTPUT SELECTION display appears
on the screen for several seconds. Refer to the chart
below.
a prerecorded VHS Hi-Fi STEREO videotape, press the
SOUND button to allow the audio to be heard through
both speakers. Normally set to the Hi-Fi STEREO
position, this button can be set to the MONO position if
the stereo broadcast or videotape audio is of poor
quality. The “R” and “L” positions allow the audio from
the Right or Left Hi-Fi channel to be heard over both TV
speakers. This button has no effect when viewing a
MONO videotape or TV program. Each time you press
the button, the OUTPUT SELECTION display appears
on the screen for several seconds. Refer to the chart
below.
OUTPUT
SELECTION
SELECTION
STEREO
L CH
R CH
MONO
L CH
R CH
MONO
SOUND HEARD ON BOTH
SPEAKERS
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
NOTES: • When playing back a tape that is not recorded
in Hi-Fi stereo mode, the audio will automati-
cally be monaural.
cally be monaural.
• When listening to a VHS Hi-Fi video tape or
MTS broadcast through the VHF/UHF jack,
the sound will be monaural.
the sound will be monaural.
RECORDING STEREO BROADCASTS
STEREO SAP
SAP
STEREO
M E N U
TIMER REC SET
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
〈
+/–/ENTER/MENU
〉
á
+/–/ENTER/MENU
ñ
TV SETUP
V-CHIP SET
ON/OFF TIMER
PICTURE
AUDIO
SAP ON OFF
V-CHIP SET
ON/OFF TIMER
PICTURE
AUDIO
SAP ON OFF
á
+/–/ENTER/MENU
ñ
TV SET-UP
V-CHIP SET
ON/OFF TIMER
PICTURE
AUDIO
SAP ON OFF
V-CHIP SET
ON/OFF TIMER
PICTURE
AUDIO
SAP ON OFF
5J70101B E P17-25
4/11/03, 5:40 PM
24