Справочник Пользователя для Premier Mounts PWM-503

 

- 9 -

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Warning: The plasma display is heavy and 2 people are needed to lift and install it. Failure to do so could result in serious personal injury.  
Before placing the plasma on the wall recheck all hardware for proper tightness and security. Before installing, become familiar with the way the plasma mount attaches to the wall 
mount. Align the four (4) tab openings to the four (4) receiving tabs on the tilt back plate. When all four (4) the tabs are aligned slide the plasma down, right and down again to lock the 
mounts together. Make sure all (4) tab openings are interlocked with the receiving tabs before letting go of the plasma. See fig 5. 

Plasma display 

Mounting 

bracket 

Tilt back plate 

(4) Tab 

openings 

Wall structure  

Plasma display 

Wall structure  

Align all four (4) tab 

openings to the tilt 

back plate receiving 

tabs and push the 

plasma as shown on 

arrows to lock in place 

Caution: The plasma display is heavy and 2 people are needed to lift and 

install it. Failure to do so could result in serious personal injury. 

Caution: All four (4) receiving tab openings from the 

mounting bracket must be locked to the tabs found on 
the tilt back plate before letting go of the plasma 
display. See the diagram on the left to see the 
interlocked tab. 

Locked tab 

For additional security gradually tilt the bracket forward using a Phillips screwdriver. Secure the two (2) M6 x 12 (mm) Phillips screws (screws) see fig 6. Do not over tighten the screws. 
Position the bracket to the desired angle. See fig 6. 

(4) Securing 

tabs