Справочник Пользователя для Brother 888-X54

KNOWING YOUR SEWING MACHINE

—

THREADING THE MACHINE

Winding the bobbin

CAUTION

Pull up the spool pin and put a spool of
thread on this pin.

While holding the thread from the spool
with your right hand, pass the thread
toward you, in the groove on the thread
guide. Then, pass the thread around the
pre-tension disk and pull the thread in
completely.

CAUTION

●

We designed the bobbin that comes with this machine. If you use bobbins from other models,
the machine will not work properly. Only use the bobbin that comes with this machine or
bobbins of the same type (part code: SA156, SFB: XA5539-151). Using other bobbins may
cause damage to the machine.

Actual size

11.5 mm

(7/16 inch)

This model

Other models

1 Pre-tension disk

2 Bobbin winder shaft

3 Bobbin

1 Pull the thread

in completely.

●

If the spool of thread is in the wrong
place, or is set incorrectly, the thread
may tangle on the spool pin.