Справочник Пользователя для Pelco C2908M-B

C2908M-B (4/05)

35

*Do not press Enter with the cursor in the Software Upload or Configuration Upload box after making an entry. If you do so, the unit will reset and 
your settings will remain unchanged.

Time server IP 
address

0.0.0.0

Enter the IP address of a TIME protocol server and then click Set. The time and date are automatically 
synchronized every two hours to this Internet server. This feature does not adjust for Daylight Saving Time; 
you should adjust manually as needed.

Hardware version N/A

Read-only hardware version number. This contains unique serial number, type of hardware, and revision.

Software version N/A

Read-only firmware version number. This is important information should you need technical support.

Software upload* N/A

Units have flash EPROMs for firmware upgrades in the field. These upgrades can be done directly from the 
web browser. Enter the name of the file containing the upgrade, or locate it using the Browse button. Then 
click the Upload button.

Upload progress

0%

This field shows the percentage of the upload that has been completed.

Configuration 
download

N/A

Clicking the Download button saves the current configuration of the PelcoNet NET300 transmission system 
to a PC file.

Configuration 
upload*

N/A

This copies a file from a PC to the NET300. Enter the name of the file containing the configuration, or locate it 
using the Browse button. Then click the Upload button to overwrite the configuration with the configuration 
stored in the named file.