Справочник Пользователя для Pelco C2908M-B

 

8

C2908M-B (4/05)

 

The PelcoNet NET300 transmission system allows live video transmission to be viewed over TCP/IP-based networks. This section is intended to 
help the network administrator know what is involved with installing this product and how it will affect the network. The person installing the 
product will need the following information about the network to make the network function properly.

 

•

A valid static IP address* for each PelcoNet NET300 transmission system unit

•

Subnet mask*

•

Default gateway (if applicable)

•

E-mail server’s IP address (if applicable)

•

Dedicated maximum allowable amount of bandwidth for live video**

* = Required for the PelcoNet NET300 transmission system to function properly

** = The PelcoNet NET300 transmission system requires a continuous amount of bandwidth to display true live video. Pelco recommends 

using switching hubs with the product so the amount of bandwidth available to each unit is constant and reliable.

 

If you plan to use a browser to view live video across the network, there are procedures to complete before you can use the browser, such as 
installing the ActiveX

 

®

 

 platform. If you installed Microsoft

 

®

 

 Internet Explorer 6.0 from the CD that came with the PelcoNet NET300 transmission 

system, you can skip step 1 below. Otherwise, perform the following before trying to use the browser.

1. Internet Explorer 6.0 or higher must be installed before continuing.

2. Set the computer’s display settings to use 16- or 32-bit color.

3. Insert the supplied CD. It will open automatically. 

 

, perform steps a through d below.

a.

Click the 

 

 menu in the Windows

 

®

 

 operating system.

b.

Click 

 

.

c.

In the Open box, type 

 

 (where D:\ = your CD ROM drive letter).

d.

Click 

 

.

4. Click 

 

and then click 

 

.

5. Follow the on-screen setup instructions to finish installing the plug-in.