Листовка для RCA RCR4258R

In most cases, the keys on 

this remote perform the same 

functions as the keys on your 

original remotes once you’ve 

programmed this remote to 

operate your devices. Many 

keys on this remote have 

other functions as well.
Device keys (TV, 

SAT•CBL•DTC, DVD•VCR, 

DVR•AUX) put the remote in 

the right mode to control your 

device.
GUIDE and MENU put the 

remote in menu/guide mode, 

which makes the CH/VOL 

keys serve as arrow keys; 

they also access the same 

features as the keys on your 

original remotes
CLEAR exits remote 

programming; it also 

performs the same functions 

as on your original remotes
CH and VOL keys have dual 

functions: they can act as 

navigation keys in menu 

systems as well as channel 

and volume controllers 

outside the menus
The INPUT and — (dash) key 

has three functions: (1) it 

toggles through all the video 

sources connected to your 

TV; (2) when the remote is 

in VCR mode, this button 

toggles between VCR and 

the TV input; (3) when you’re 

entering digital channel 

numbers directly, this button 

lets you separate the main 

channel number from the 

sub-channel number (such 

as 59.1)

Your universal remote control saves battery power by 

automatically turning off if any key is pressed for more than 

60 seconds. This saves your battery life should your remote 

get stuck in a place where the keys remain depressed, such as 

between sofa cushions.

•  Keep the remote dry. If it gets wet, wipe it dry immediately.
•  Use and store the remote only in normal temperature 

environments.

•  Handle the remote gently and carefully. Don’t drop it.
•  Keep the remote away from dust and dirt.
•  Wipe the remote with a damp cloth occasionally to keep it 

looking new.

•  Modifying or tampering with the remote’s internal devices can 

cause malfunction and invalidate its warranty.

Your universal remote requires two AAA alkaline batteries (not 

included).

  Press and push the battery 

compartment cover to remove 

it.

 Insert the batteries, matching 

the batteries to the (+) and 

(–) marks inside the battery 

compartment.

 Push the battery cover back into 

place.

To use this universal remote with your home entertainment 

system, first you need to program it to control your devices. 

There are four ways you can program the universal remote to 

operate your devices: 

• 

The Auto Code Search goes automatically through all the 

codes for the device you’re trying to control. It’s the easiest 

method, but it can sometimes take longer than some of the 

other programming methods. 

•   The Brand Code Search searches through the codes for 

select brands of devices. It’s not as easy as the auto code 

search, but it can be faster.

•   The Direct Code Entry lets you enter a code from the 

accompanying code list for your brand of device. It’s not as 

easy as the other methods, but it’s potentially the fastest 

method.

•   The Manual Code Search lets you manually go through 

all the codes for the device you’re trying to control.

Testing the Code for Maximum Functionality
1.   Try a variety of the device’s functions with the remote. If 

some device features don’t work, go to the next step to try 

a different code.

2.   Repeat the Auto Code Search Method from the beginning. 

When your device turns off, do not stop searching. 

Instead, with the unit now off, continue to press the PLAY 

key every 5 seconds until the unit turns back on. 

3.   Once the unit turns back on, press the REVERSE key on the 

remote every 2 seconds until your device turns off again. 

When your device turns off again, press the STOP key. 

4.   Test the key’s functionality again by attempting to control 

a variety of the device’s functions. If the code that has 

been stored controls the majority of the device’s functions, 

programming is complete. If the code stored does not give 

maximum functionality, try another code.

The Auto Code Search goes automatically through all the 

codes for the device you’re trying to control. When you find 

the one that operates your device, you can stop the search and 

store that code. 

Changing a Key’s Device Type section. 

  Manually turn on the device you 

want to control. 

  Press and hold the device key you want to program. While 

you’re holding down the device key, use your other hand 

to press and hold the remote’s POWER key at the same 

time.

  Wait until the remote’s indicator 

comes on and stays on. Then 

release both keys.

  Keep the remote pointed directly 

at the front panel of the device 

you want to control. Press 

PLAY on the remote and wait 5 

seconds. The remote is testing a 

batch of 10 codes on your device.

YES: Go to step 5.

NO: Press PLAY again. The remote tests the next batch of 

10 codes. 

 

Keep pressing PLAY every 5 seconds until your device turns 

off. 

When your device turns off, press 

the REVERSE key on the remote 

and wait at least 2 seconds. 

The remote tries the last of the 

previous ten codes. 

 

YES: Press the STOP key. You’re 

done! You’ve programmed this 

device key.

NO: Press REVERSE again. The remote tests the next 

code in the batch. 

 

Keep pressing REVERSE every 2 seconds until your device 

turns back on. When it does, press STOP.

Testing the Code for Maximum Functionality
1.   Try a variety of the device’s functions with the remote. If 

some device features don’t work, go to the next step to try 

a different code.

2.   Repeat the Brand Code Search from the beginning. When 

the device turns off for the first time, don’t press the STOP 

key, which would store the same code. Instead, with the 

unit now off, continue to press the POWER key repeatedly 

until the unit turns back on.

3.   Once the unit turns back on, you have found another code 

that operates the device. Press the STOP key.

4.   Test the key’s functionality again by attempting to control 

a variety of the device’s functions. If the code that has 

been stored controls the majority of the device’s functions, 

programming is complete. If the code stored does not give 

maximum functionality, try another code.

The Brand Code Search goes through only the codes for one of 

the select brands listed in the accompanying code list. If your 

brand of device is listed, this search can be very quick and easy. 

device key for a different type of device, see the Changing a 

Key’s Device Type section. 

  Manually turn on the device you 

want to control. 

  Press and hold the device key you want to program. While 

you’re holding down the device key, use your other hand 

to press and hold the remote’s POWER key at the same 

time.

  Wait until the remote’s indicator 

comes on and stays on. Then release 

both keys.

  Keep the remote pointed directly 

at the front panel of the device you 

want to control. Press POWER on 

the remote and wait 2 seconds. The 

remote is testing a single code for 

your device’s brand.

YES: Press the STOP key to store the code. You’re done! 

You’ve programmed this device key.

NO: Press POWER again. The remote tests the next code 

for your brand. 

 

Keep pressing POWER every 2 seconds until your device 

turns off. When it does, press STOP.

  Find your device’s brand in the 

Brand Code list section of the 

accompanying code list. Circle 

the number for your brand and 

keep the list handy. 

0

1

2

3

4

5

6

7

8

9

TV

VCR

0

1

2

3

4

5

6

7

8

9

DVD

SAT/CAB

LE

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

  Look at the number you circled for 

your device’s brand code number. 

Press that number on the remote 

keypad.

Direct Code Entry lets you enter a code from the accompanying 

code list for your brand of device. It’s not as easy as the other 

methods, but it’s potentially the fastest method.

device key for a different type of device, see the Changing a 

Key’s Device Type section. 

  Manually turn on the device you 

want to control. 

  Press and hold the device key you want to program (the 

indicator light comes on). 

 

While you’re holding down the device key, use your other 

hand enter the first five-digit code for your brand in the 

code list (the indicator light goes off after the first digit).

  Find the Code List that came with 

the remote. Locate the section for 

the type of device you’re trying to 

program, and find your brand in 

that section. Circle the codes for 

your brand and keep them handy. 

0

1

2

3

4

5

6

7

8

9

TV

VCR

0

1

2

3

4

5

6

7

8

9

DVD

SAT/CAB

LE

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

  When you’ve finished entering 

the five-digit code, keep holding 

down the device key and look at 

the indicator light. 

YES: You’re done! You’ve 

programmed this device key.

NO, it blinked four times and turned off: You have 

either entered a code number that is not in the code lists 

or missed a step in the code entry procedure. Try step 3 

again. 

Indicator light

The Manual Code Search lets you go one-by-one through all the 

codes for the device you’re trying to control. When you find the 

one that operates your device, you can stop the search and store 

that code. 

a different type of device, see the Changing a Key’s Device 

Type section. 
To exit without saving a new code at any point in the Manual 

  Manually turn on the device you 

want to control. 

  Press and hold the device key you want to program. While 

you’re holding down the device key, use your other hand 

to press and hold the remote’s POWER key at the same 

time.

  Wait until the remote’s indicator 

comes on and stays on. Then release 

both keys.

  Keep the remote pointed directly at the front panel of the 

device you want to control. Press POWER on the remote and 

wait 2 seconds. The remote is testing a single code for your 

device.

 

YES: Press the STOP key to store 

the code. You’re done! You’ve 

programmed this device key.

NO: Press POWER again. The 

remote tests the next code for 

your device. 

 

Keep pressing POWER every 2 

seconds until your device turns off. 

When it does, press STOP.

 

Testing the Code for Maximum Functionality
1.   Try a variety of the device’s functions with the remote. If 

some features of your devices don’t work, go to the next 

step to try a different code.

2.   Repeat the Manual Code Search and Entry Method from 

the beginning. When the device turns off for the first time, 

don’t press the STOP key, which would store the same 

code. Instead, with the unit now off, continue to press the 

POWER key repeatedly until the unit turns back on. 

3.   Once the unit turns back on, you have found another code 

that operates the device. Press the STOP key.

4.   Test the key’s functionality again by trying a variety of 

functions. If the code controls the majority of the device’s 

functions, programming is complete. If the code stored 

does not give maximum functionality, try another code.

Each device key is associated with a type of device—the TV is 

preset to search for TVs, SAT•CBL•DTC for satellite receivers, 

digital TV converters or cable boxes, DVD•VCR for DVD players or 

VCRs, and DVR•AUX for DVRs. To program these keys to control a 

different kind of device, you have to reassign them first.

Reassigning the DVD•VCR Key to Control a VCR
The DVD•VCR key defaults to control a DVD player. If you want 

the DVD•VCR key to control a VCR, you must reassign it.
1.   Press and hold the DVD•VCR key. The indicator turns on. 

Keep holding down the DVD•VCR key.

2.   While holding down the DVD•VCR key, press and release 

the number 2 key on the keypad. The indicator turns off.

3.   Release the DVD•VCR key. The indicator blinks four times and 

then turns off. The DVD•VCR key is now set to control a VCR.

4.   Follow the directions in the auto, brand, direct entry, or 

manual code search to program the DVD•VCR key for your 

VCR. 

Reassigning the DVR•AUX Key To Control Other 
Devices
The DVR•AUX key defaults to control a DVR. If you want the 

DVR•AUX key to control a different device (an additional TV, 

DVD, satellite, digital TV converter or cable box, for example), 

you must reassign it.
1.   Press and hold the DVR•AUX key. The indicator turns on.
2.   While holding down the DVR•AUX key, press and release the 

number key on the keypad for the device you wish to control 

(see the chart below). The indicator turns off.

Additional TV

press 1

VCR or DVR

press 2

Additional DVD

press 3

Additional satellite, digital TV 

converter or cable box

press 5

3.   Release the DVR•AUX key. The indicator blinks four times 

and then turns off. The DVR•AUX key is now set to control 

the device type you selected.

4.   Follow the directions in the auto, brand, direct entry, or 

manual code search to program the DVR•AUX key. 

Once you’ve programmed the remote to control your devices, 

you may want to record the codes for future reference. If 

you used the Direct Code Entry method, this is easy. Just 

find the codes you entered and make a note of them in the 

boxes below. If you used one of the Code Search methods to 

program your remote or if you used the Direct Entry method 

but don’t remember the code, you will need to retrieve each 

device’s five-digit code. Retrieving the actual code and writing 

it down will save you time if you ever need to program the 

remote again (e.g., if programming is lost when you change 

the batteries). If the codes are recorded, you can use the 

Direct Entry method to reprogram your remote to control your 

devices, which is quick and easy.

1.   Press and hold the device key 

(TV, SAT•CBL•DTC, DVD•VCR, 

DVR•AUX) whose code you wish 

to retrieve. The indicator turns 

on. Keep pressing the device 

key.

2.   While holding the device key down, press and hold the 

INFO key. The indicator turns off. After holding down both 

keys for three seconds, the indicator turns back on.

3.   Release both keys. The indicator remains on.
4.   Starting with the number 1 key, press and release each 

number key on the keypad in the following order: 1-9, then 

0. The number that causes the indicator to blink is the first 

number of the code. As you find each number of the code, 

write it down for future reference.

5.   Repeat step 4 until you have retrieved all five numbers in 

the code. After the fourth number is retrieved, the indicator 

blinks briefly, then turns off.

Many devices use on-screen menus and guides to help you 

navigate through all their features and programming. While 

this remote may not access every menu or guide system 

of every device model, it does offer some menu and guide 

functionality.
To use a device’s on-screen menu or guide system, you first 

have to put the remote in Menu or Guide Mode.
1.   Make sure your devices are turned on and your TV is set 

to the correct device input (use the INPUT key to toggle 

through inputs when in TV Mode.)

2.   Press the device key whose menu you want to access.

4.   Use the VOL+/- and CH+/- keys to 

navigate through the on-screen 

menu system or guide. To select the 

highlighted item, press the OK key.

The remote automatically times out of Menu or Guide Mode 

after 20 seconds of inactivity (no keys being pressed). At that 

time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the 

corresponding device key on the remote (TV, SAT•CBL•DTC, 

DVD•VCR, DVR•AUX). The indicator turns off.

Problem: The remote does not operate your device.
•  

Make sure the remote is in the correct mode by pressing 

the corresponding device key (TV, SAT•CBL•DTC, DVD•VCR, 

DVR•AUX). This tells the remote which device to operate.

•  

Remove any obstacles between the remote and the device. Make 

sure you’re aiming the remote at the device’s IR sensor.

•  

Make sure the batteries are fresh and are properly installed. 

Replace the batteries with two new AAA batteries, if necessary 

(see the Battery Installation section). 

device.
•  

If you are testing the remote while programming it, you may be 

too far away from the device or at a wrong angle. There must be 

an unobstructed path between the remote and the IR sensor on 

the device. Move closer and make sure you point the remote at the 

device you’re trying to control.

•  

If you’re using the Direct Entry programming method to enter 

the codes for your brand and the unit is still not functioning 

properly, try the auto, brand, or manual search method.

•  

To control combo units, like TV/VCRs or TV/DVDs, you must 

program the individual corresponding device keys to control 

each part of the combo unit. Once programmed successfully, the 

TV key controls the TV functions, and the DVD•VCR key controls 

the VCR or DVD functions. 

•  

Make sure the batteries are fresh and are properly installed.

Problem: The remote doesn’t perform commands properly.
•  

Make sure the remote is in the correct mode by pressing 

the corresponding device key (TV, SAT•CBL•DTC, DVD•VCR, 

DVR•AUX). This tells the remote which device to operate.

•  

Make sure device is ready (for example, the DVD player has a 

disc loaded).

•  

You may have pressed an invalid key for the mode the remote is in.

•  

If you’re trying to enter a channel number directly, try pressing 

the ENTER key after entering the channel number as this is a 

requirement of certain models and brands.

•  

There is a possibility that a programmed code may only be 

able to control some of your device features (for example, only 

turns a device on and off). To confirm that the device key is 

programmed with the correct code for maximum functionality, 

test the device. Attempt to control a variety of the device’s 

functions with the remote. If some of the features of your 

devices don’t work, try programming the remote with a different 

code in the list using the Direct Code Entry Method, until you 

find the code that allows the remote to control the majority of 

your device’s functions. Different codes can provide different 

levels of functionality.

Problem: The indicator does not light when you press a key.
•  

You may have pressed an invalid key for the mode the remote is 

in. 

• 

Make sure the remote is in the correct mode by pressing 

the corresponding device key (TV, SAT•CBL•DTC, DVD•VCR, 

DVR•AUX). This tells the remote which device to operate.

•  

Make sure the batteries are fresh and are properly installed. 

Replace the batteries with two new AAA batteries, if necessary 

(see the Battery Installation section). 

Problem: The remote will not change channels on device.
• 

Make sure the remote is in the correct mode by pressing 

the corresponding device key (TV, SAT•CBL•DTC, DVD•VCR, 

DVR•AUX). This tells the remote which device to operate.

•  

Press the ENTER key after you enter a channel number.

•  

Remove any obstacles between the remote and the device. Make 

sure to aim the remote at the IR sensor on the device.

Problem: The device’s menu does not appear on the TV screen.
•  

Make sure you have connected the device to your TV properly and 

selected the correct input. (See your devices’ Owner’s Manuals for 

proper connection procedures.)

• 

Make sure the remote is in the correct mode by pressing 

the corresponding device key (TV, SAT•CBL•DTC, DVD•VCR, 

DVR•AUX). This tells the remote which device to operate.

•  

Menu access isn’t supported for all brands. You may need to use 

your original remote control to access menu functions for some 

devices. 

Audiovox Electronics Corporation (the “Company”) warrants to you the 

original retail purchaser of this product that should it, under normal use 

and conditions, be proven defective in material or workmanship during 

its lifetime while you own it, such defect(s) will be repaired or replaced 

(at the Company’s option) without charge for parts and repair labor. To 

obtain repair or replacement within the terms of this Warranty, the product 

is to be delivered with proof of warranty coverage (e.g. dated bill of sale), 

specification of defect(s), transportation prepaid, to the Company at the 

address shown below. 
This Warranty does not cover product purchased, serviced or used outside 

the United States or Canada. This Warranty is not transferable and does 

not extend to costs incurred for installation, removal or reinstallation of 

the product. This Warranty does not apply if in the Company’s opinion, 

the product has been damaged through alteration, improper installation, 

mishandling, misuse, neglect, accident, or the simultaneous use of different 

battery types (e.g. alkaline, standard or rechargeable).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS 

LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO 

EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE 

PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY 

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 

BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL 

THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL 

DAMAGES WHATSOEVER. No person or representative is authorized 

to assume for the Company any liability other than expressed herein in 

connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied 

warranty lasts or the exclusion or limitation of incidental or consequential 

damage so the above limitations or exclusions may not apply to you. This 

Warranty gives you specific legal rights and you may also have other rights, 

which vary from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, 

New York 11788 

CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,  

Unit 3, Door 16, Mississauga, Ontario  L5T 3A5

Trademark(s) ® Registered 

RCR4258R US 05 

RCR4358R US 05

©2010 Audiovox Accessories Corporation 

111 Congressional Blvd., Suite 350 

Carmel, IN  46032

SAT

CABLE    

dTv ConvErTEr

dvd

vCr

dvr/vCr

dvd

Tv

SAT•CBL•DTC

3.   To access menus, press the MENU key. To access guides, 

press the GUIDE key. The indicator starts blinking, 

indicating you are in Menu or Guide Mode.

Indicator