Справочник Пользователя для RCA RCU800

11

RCU800

1. Manually turn on the component you want the remote 

to operate.

2. Press and hold the CODE SEARCH key until the indicator 

light illuminates. Then release the CODE SEARCH key.

3. Press and release the component key that corresponds to the

component you want the remote to operate (TV, VCR, DVD,
DBS•SAT, CABLE, AUDIO

). For an auxiliary component,

press the AUX key, then the corresponding component key. For
CD, press the AUX key, then the DVD key. The indicator light
blinks once and then remains lit.

4. Aim the remote at the component. Press the ON•OFF key

continuously until the component turns off.

: Because there are so many codes, you may have to

press the ON•OFF key many times—possibly up to 200 times.

5. When the component turns off, press the ENTER key 

to store the code.

6. Use the Code Retrieval section on the next page to identify 

the code for your component for future reference.

1. Turn on the component you want the remote to operate.

2. Press and hold the CODE SEARCH key until the indicator

light illuminates. Then release the CODE SEARCH key.

3. Press and release the component key that corresponds to 

the component you want the remote to operate (TV, VCR,
DVD, DBS·SAT, CABLE, AUDIO

). For an auxiliary component,

press the AUX key, then the corresponding component key. For
CD, press the AUX key, then the DVD key. The indicator light
blinks once and remains lit.

4. Aim the remote at the component and press the ON•OFF

key once. The remote automatically sends every code for 
the specified component one at a time, with the three-second
delay between each code. Keep the remote aimed at the
component throughout this process.

5. As soon as the component turns off, you must press the

key immediately so the remote stores the correct 

code. If you do not press the ENTER key within three seconds,
the remote sends the next code in the list, and you will have 
to start over from step 2.

6. Use Code Retrieval section on the next page to identify 

the code for your component for future reference.

If your component’s brand is not listed in the Code List or you have tried all the codes for your 
brand and the remote does not operate your component, use one of the Code Search methods below—
Manual Code Search or Auto Code Search. Both Code Search methods search all of the codes since
your component’s code may be listed under another brand in the Code List.

: The Code Search method may take a long time because the remote searches all of the codes in 

its memory for the code that operates your component. Therefore, if your brand is listed in the
Code List, use the Direct Entry method described on pages 5-9. 

RCU800B_IB_REVB.qx4  2/11/04  13:05  Page 11