Справочник Пользователя для Mitsubishi Electronics LY42NT1P
64
6.2.2
For the 40-pin connector type module
(1) Precautions
• Use copper wires having temperature rating of 75°C or more for the connectors.
• Tighten the connector screws within the following specified torque range.
• Tighten the connector screws within the following specified torque range.
(2) Applicable connectors
The 40-pin connector for input module, output module, or I/O combined module is obtained by user.
The following tables list the 40-pin connectors, crimp tool, and pressure-displacement tools.
The following tables list the 40-pin connectors, crimp tool, and pressure-displacement tools.
(a) 40-pin connector
*1
Use cables with outside diameter of 1.3mm or shorter to connect 40 cables to the connector.
In addition, consider the amount of current to be used and select appropriate cables.
In addition, consider the amount of current to be used and select appropriate cables.
(b) Crimp tool and pressure-displacement tools for the 40-pin connectors
For wiring of connector and usage of crimp tool and pressure-displacement tool, contact FUJITSU
COMPONENT LIMITED.
COMPONENT LIMITED.
Screw type
Tightening torque range
Connector screw (M2.6)
0.20 to 0.29N
m
Type
Model Name
Applicable wire size
Applicable models
Soldering connector
(straight out type)
(straight out type)
A6CON1
0.08 to 0.3mm
2
(28 to 22 AWG) (stranded wire)
LX41C4, LX42C4, LY41NT1P, LY42NT1P,
LY41PT1P, LY42PT1P, LH42C4NT1P,
LH42C4PT1P
LY41PT1P, LY42PT1P, LH42C4NT1P,
LH42C4PT1P
Crimp connector
(straight out type)
(straight out type)
A6CON2
0.088 to 0.24mm
2
(28 to 24 AWG) (stranded
wire)
Pressure-displacement connector
(straight out type)
(straight out type)
A6CON3
28 AWG (stranded wire)
30 AWG (single wire)
Flat cable of 1.27mm pitch
30 AWG (single wire)
Flat cable of 1.27mm pitch
Soldering connector
(both for straight out and 45-degree
types)
(both for straight out and 45-degree
types)
A6CON4
0.088 to 0.3mm
2
(28 to 22 AWG) (stranded
wire)
Type
Model name
Contact
Crimp tool
FCN-363T-T005/H
FUJITSU COMPONENT LIMITED
Pressure-
displacement tool
displacement tool
FCN-367T-T012/H (locator plate)
FCN-707T-T001/H (cable cutter)
FCN-707T-T101/H (hand press)