Справочник Пользователя для Mitsubishi Electronics QJ71LP21
2 - 12 2 - 12
MELSEC-Q
2 SYSTEM CONFIGURATION
(2) Table 2.8 lists the setting items for the remote I/O module main module for the
remote I/O station (R) and the parameter setting items from the GX Developer.
Table 2.8 Remote I/O station setting items
Setting items
Remote I/O station (R)
Reference
Network module main module switch
STATION NO.
1 to 64
Section 4.2.2
MODE
Section 4.2.2
GX Developer parameter setting
PLC
PLC
system
4
PLC
RAS
4
I/O
assignment
4
Operation
setting
Section 5.2.1
Ethernet
setting
5
CC-Link
setting
6
Remote password setting
Section 7.12
GX Configurator setting
Initial
Initial
setting
Section 5.2.1(4)
Auto refresh setting
Section 5.2.1(4)
: Always set, : Default setting, : Set as needed, : No need to set
4 : Refer to the User's Manual (Function Explanation, Program Fundamentals) for
the CPU module used.
5 : Refer to the Q Corresponding Ethernet Interface Module User's Manual (Basic)
(SH-080009). Note that the interrupt setting is not available.
6 : Refer to the MELSEC-Q CC-Link System Master/Local Module User's Manual
(SH-080394E). Note that the interrupt setting is not available.
2.4.3 Available device ranges
The remote I/O network can use the following device ranges in the network module.
Device Available
range
Others
LB 0
H
to 3FFF
H
(16384 points)
—
LW 0
H
to 3FFF
H
(16384 points)
LX 0
H
to 1FFF
H
(8192 points) The device range (excluding that of I/O module mounted on the host
station) should be assigned to each network module.
LY 0
H
to 1FFF
H
(8192 points)
B/W
LB/LW
Remote I/O network 2
LB/LW
CPU module
0
3FFF
H
2000
H
3000
H
(4096)
1000
H
(8192)
(12288)
(16383)
Remote I/O network 1
X/Y
LX/LY
Remote I/O network 2
LX/LY
CPU module
Remote I/O network 1
Real I/O
1: Expandable by changing from [PLC parameters] - [Device settings]
Extended function area 1