Справочник Пользователя для Universal Electronics OARC05G

You can program this remote to issue a sequence of commands 
at the press of one button. Any sequence of commands you 
regularly use can be reduced to one key stroke for your 
convenience. For example, you may want to make a single key 
the master power off button for all of the devices this remote 
controls. 

1.   Press and hold down the SET key until the   (power) key 

blinks twice (the key blinks once, then twice).

2.   Press 9 9 5.
3.   Press the key to which the Macro will be assigned (in this 

case, the yellow key).

4.   Next press the commands you want to be part of the macro 

(in this case, TV,  , AUX,  , DVD/VCR,  ).

5.   To store the Macro, press and hold down the SET key until 

the   (power) key blinks twice (the key blinks once, then 
twice).

6.   Whenever you press the key you assigned to this macro (in 

this case, the yellow key), the remote will automatically send 
the sequence of commands you entered in step 4 (in this 
case, it will turn off your TV, VCR and DVD player).

•   To erase the Macro from the Yellow key, press:
 

[SET]* [9] [9] [5] [Yellow key] [SET]*

 

* Here you must hold down the SET key until the   (power) 
key blinks twice (the key blinks once, then twice).

Important notes:
•   Each MACRO can consist of a maximum of 15 key presses. 

This remote can hold up to 15 macros, depending on the 
complexity of each. In other words, the more complex the 
macros, the fewer separate macros the remote can store.

•   Make sure that you program a Macro on a spare key that 

you don’t use in any mode.

•   Once you program a Macro on a specific key, the sequence 

will work regardless of the mode (TV, AUX and DVD/VCR) 
you are using.

•   To avoid accidental recordings with this remote, you must 

press the Record key twice to begin recording. Because of 
this, you cannot assign a Macro to the Record key.

•   If you have to hold down a key for a few seconds on the 

original remote control to get a function, this function may 
not work in a macro on this remote.

•   If you program a Macro on a key, the original function will 

become shifted (excluding CH+/- and VOL+/- keys). Press the 
SET key then the key to access it.