Справочник Пользователя для Universal Electronics OARC05G

4.  Enter a five-digit code for your device’s brand using the 

number keys. The   (power) key blinks twice.

 

Note: If the   (power) key gives one long blink instead 
of two shorter blinks, you’ve entered an invalid code. Try 
entering a code again.

5.  Now, aim this remote at your device and press   (power). 

If your device switches off, the remote is ready to operate 
your device.

6.  Turn your device back on and try all the remote’s functions 

to ensure they are working properly. If the functions do not 
work properly, repeat steps 1–5 using another code listed 
for your brand.

7.  If your device does not respond, follow steps 1 to 5 with each 

code listed for your brand. If none of the codes listed for 
your brand operate your device, or if your brand is not listed 
at all, try the search method described in the next section.

Important notes:
•   If your device does not respond or is not functioning 

properly with one of the codes, try another code listed 

under your brand.

•   If your device’s original remote control does not have a 

POWER key, press   (play) instead of   (power) when 

setting up your device.

•   Remember to press the correct device key before operating 

your device. Only one device can be assigned to a device key. 

If your original remote operates more than one device, you 

need to set up each device separately.

If your device does not respond to this remote after you have 

tried all the codes listed for your brand, try searching for your 

code. The Search Method allows you to find the code for your 

device by scanning through all the codes contained in the 

remote’s memory. The Search Method may also work if your 

brand is not listed at all.

1.   Switch your device on (not on standby).
2.  Press the device key on this remote for the device you wish 

to set up.

3.   Press and hold down the SET key until the   (power) key 

blinks twice (the key blinks once, then twice).

4.   Press 9 9 1. The   (power) key blinks twice.
5.   Press the number key corresponding to the device you want 

to program: 0 for cable, satellite, digital TV converter, or 

video accessories; 1 for a TV; 2 for a DVD player, VCR, or 

PVR; 3 for an audio component (tuner, amplifier, etc.).

6.   Aim this remote at your device. Now press CH+ over and 

over, until your device turns off (every time you press the 

CH+ key the remote sends out a power signal from the next 

code contained in the memory). You may have to press this 

key many times (up to 150 times) so please be patient. If 

you skip past a code, you can go to the previous code(s) 

by pressing the CH- key. Remember to keep pointing the 

remote at your device while pressing this key.

7.   As soon as your device turns off, press the SET key to store 

the code.

Important note:
•   If your device’s original remote control does not have a 

POWER key, press   (play) instead of   (power) in step 5.