Справочник Пользователя для Toshiba RBC-AMS41E

GRUPAd.o.o.

10

• Scheduled operations for a 1-week period can be 

performed using this remote controller.

• Eight (01 to 08) operations for each day of the week 

can be set in a scheduled operation program (item 
settings).
– The following items can be set in a program:

a. Operation time
b. Operation start/stop
c. Operation mode
d. Temperature setting (frost protection)
e. Restriction on button operations
f. Save operation

• With a scheduled operation, the air conditioner is 

operated at the set operation time according to the 
program which has been set.

• The operation time can be set in 1-minute increments.

* Restriction on button operations

This function cancels the button operations while a 
scheduled operation is being executed. To use this 
function, refer to the “Selecting the remote controller 
functions” section and change the settings before 
proceeding with the program settings described 
below. The initial (factory) setting calls for no 
restriction on the button operations.

* Save operation

The save operation function is not provided for 
some models and systems. To find out whether the 
function is provided, consult your dealer or a 
contractor with specialized experience.

* Concerning the “Continue xx” setting

The “Continue” setting can be established for the 
operation start/stop, operation mode and 
temperature setting items. This setting causes the 
current operation modes of the indoor units to be 
continued. 

* “Continue” is set on the initial screen for each item 

of each program number so in the example of the 
operation given above there is no need to input 
anything for the operation start/stop and operation 
mode items.

* This function does not work if the “timer operation 

function” or “no timer function” has been selected by 
following the steps set forth in the “Selecting the 
remote controller functions” section.

• Perform the steps below to set up a scheduled 

operation program (item settings).
* Programs can be set up whether the air conditioner 

is running or shut down.

* While these steps are being taken, an air 

conditioner which is operating continues to operate.

• The display transfers to the program input screen.
• The entire LCD screen starts blinking.

• Repeatedly push the button to move the day arrow 

 to the position above the day of the week when 

the scheduled operation is to be executed.

• Set the day of the week when the scheduled 

operation is to be executed.

• The days of the week display and the day arrow 

 

stop blinking and light up.

• Each time the button is pushed, the number on the 

numeric display changes in the following 
sequence.

• Stop pushing the button when the number to be 

programmed blinks on the display.

* For the items inside the square parentheses, 

refer to the “Editing the operation programs” 
section.

• The program number on the numeric display stops 

blinking and lights up.

• Set the operation time. This time must be input.
• The steps taken are the same as for setting the 

clock.
* After setting the time, there is no need to push 

the 

 button (42). All the items will be entered 

together in step 8.

MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr, e-mail: toshiba@mbfrigo.hr