Справочник Пользователя для X10 Wireless Technology IR34A

22

23

Press the FAVORITE key to select 
your favorites group. Then press the 
Side Key next to the logo to change 
your device to that channel. Selecting a 
favorite group that has not yet been set 
up, takes you to the setup Wizard.

Important: Make sure you point the 
remote at your device until the channel 
changes. Pressing a Favorite key might 
send the commands for say channel 
162, but if you don’t point the remote at your device until all 
three digits are sent you might just get channel 16, or even 
channel 1. 

Watch the fl ickering halo at the bottom left of the screen, it 
fl ickers for each digit sent. It also shows what device is being 
controlled.

Press the HOME key at any time to access the screen to do 
setups, or access other features.

Before you continue, press Side Key K5 next to the Help icon 
and follow the prompts to get an idea of how to use the remote.
Only Devices you’ve previously set up are displayed. The 
others are grayed out.

QuickPower is a way of quickly turning 
all your devices on or off from one easy 
to use screen. 

• 

Press the HOME key to go to the  
Home screen.

• 

Then press the Side Key next to 
QuickPower. Only Devices you’ve 
previously set up are displayed. The 
others are grayed out.

• 

Press any key that isn’t grayed out to 
send the “Power” command for that 
device.

Press the MODE key, then select a device 
type to change the mode that the remote 
is in. E.g., if the remote is in Cable mode 
then the hard keys such as Channel Up/
Down, Volume Up/Down, numbers, etc., 
operate your cable box. 

Also, when you select a mode, any extra 
keys for that mode and any keys you’ve 
learned for that mode are displayed. The 
current mode that the remote is in is shown by an icon in the 
lower-left portion of the screen. (The remote screen shown 
above is in TV mode.)

• Select “Pick Module.” The Pick Room screen appears.
•  Select the room that has the module you want to control.
•  Select the module using the Side Key. Try a simple “Off” 

command for now, but understand that you can string many 
commands from different modules and different rooms to-
gether in conjunction with delays as well.

• Select Save and then Done.
• Select Home/Sleep/X10.
•  Press the Side Key to toggle when the command(s) will be 

sent for 15 minutes to up to an hour and a half away from the 
current time. Press OK to exit.

.

•  Set up an X10 device using the Wizard 

or Add-Edit mode, for example a light 
in your Living Room with an LM465 
module.

• Select Home/Setup/X10/More/QuickPower Macro.
• Select Pick Module, and select the command (s) you want to 

send. Try a simple “Off” command for now, 
but understand that you can string many commands from dif-
ferent modules and different rooms together in conjunction 
with delays as well.

• Select Save and then Done.
• Select Home/QuickPower.
•  Press the Side Key next to the X10 icon to trigger the Quick 

Power Macro.