Справочник Пользователя для Studer Innotec RCC-03

 

 

 

 

47 

Description: 

The availability of an inverter or a inverter/charger 
allows its power to be extended with an Xtender 

connected in cascade. The maximum power of 

the first inverter is limited by the maximum current 
from the transfer relay of the Xtender. 

 

 
Associated current configurations: 
•  Maximum current of the AC source {1107} Adjust this configuration in relation to the maximum 

current that can supply the old inverter. 

•  Locking: Smart boost inactive {1126} Suppress the locking of this function: This way, when the first 

inverter has reached it maximum power, the power consumed that will be supplied by the 
Xtender could be increased. 

•  Locking: Inactive charger {1125} This lock, without which the battery energy would be taken by 

the first inverter, is returned by the Xtender charger. This would only have the effect of 
discharging the battery with losses caused in the two inverters or inverter/chargers. 

Description: 

Consumers with different supply priorities allow 
automatic disconnection of the supply to 

consumers of lower priority if the battery becomes 

weak. The supply of the priority loads is thus 
assured, such as lighting or computers, for 

example. In this case, the low-priority loads must 

be cabled via one of the auxiliary relays. The 
reference for the example below correspond to 

the auxiliary contact no 1. 

 

 
Associated current configurations: 
•  Communication mode {1202} 
•  Relay activated by the battery voltage {1245} 

•  Voltage 1 active {1246} 

•  Voltage 1 {1247} 
•  Duration 1 active {1248} 

•  Voltage for deactivation of the auxiliary relay {1255} 

•  Duration for deactivation {1256}