Справочник Пользователя для Studer Innotec RCC-03

 

 

 

 

7 

FOREWORD 

This manual contains information relating to the functioning of the RCC-02 and RCC-03 remote 

controls.  
The use of certain functions sometimes requires increased knowledge in various fields. This manual 

cannot provide this. In case of doubt, please contact your reseller or installer. 

 

This symbol is used to indicate the presence of a dangerous voltage that is sufficient 

to constitute a risk of electric shock. 

 

This symbol is used to indicate a risk of material damage. 

 

This symbol is used to indicate information that is important or which serves to 
optimise your system. 

 

Terminology: 
The following terms are used in the manual to provide greater clarity: 

RCC is used to indicate the remote control RCC-02 or RCC-03 if the description applies to both 

models. 
Installation is used to describe all the electrical equipment connected together. This may be the 

source (public grid or generator), and one or more Xtender(s) with or without remote control as well 

as electrical consumers. 
System is used to describe the entirety of Xtenders with or without remote control. 

Xtender or combi is used to describe one or more Xtender(s) connected together. 

The RCC remote control conforms to the European directive 2002/95/EC on hazardous substances 
and does not contain the following elements: lead, cadmium, mercury, hexavalent chrome, PBB or 

PBDE. 

 

 

To dispose of this product, please use the service for the collection of electrical waste and observe 

all applicable obligations according to the place of purchase.