Справочник Пользователя для Philips FTR9964

11

Caption Service
Closed Captioning allows you to read the voice content of
television programs on the TV screen. Designed to help the
hearing impaired, this feature uses on-screen ‘text boxes’
to show dialogue and conversations while the TV program
is in progress. Captions will appear on the screen during
captioned broadcasts.

&

Select 

with the cursor down.

é

Press the cursor right.

“

Select the desired 

• 

Dialogue (and descriptions) for the action on the 
captioned TV program shows on screen.
Usually CC 1 is the most used. CC 2 may be used for 
alternate languages if they are being transmitted.

•

Often used for channel guide, schedules, bulletin board 
information for Closed Caption programs, news, weather
informations or stock market reports.
Not all Caption Services are necessarily being used by a TV 
channel during the transmission of a Closed Caption program.

‘

See Closed Captions in the TV-Features menu, p. 14, to turn
the 

or 

.

&

Select 

with the cursor down.

é

Press the cursor right to select 

or 

.

to activate the continuous display of the channel

number and extended display of TV channel and channel
information on screen.

to activate the display of reduced channel

information.
See Use of the Remote Control, p. 6, Display information.

Time zone
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display
for your local time.

&

Select 

with the cursor right.

é

Select your local time zone.

Daylight saving
Daylight saving time is automatically set by specially
broadcasted signals.This menu item allows you to disable
the automatic setting of daylight saving time.This is useful if
you live in an area or state where daylight saving is not
applied, but you receive channels from other areas where
daylight saving signals are broadcasted.

&

Select 

with the cursor right.

é

Select 

for automatic clock correction for

daylight saving time, based on specially broadcasted signals.

“

Select 

to disable automatic clock correction based on

the specially broadcasted signals.

Center mode 
When you have connected a multi channel audio receiver
to the receiver box (see Connect peripheral equipment, p.
30) and you have selected 

, the

loudspeakers of the monitor will act as center speaker,
making a separate center speaker unnecessary.

Set/Change pin
The Set/Change pin menu item allows you to create or
change a Personal Identification Number (PIN).

&

Select 

/

with the cursor down.

é

If no PIN exists yet, the menu item is set to 

. Follow

the instructions on screen.
If a PIN has previously been entered, the menu item is set
to 

. Follow the instructions on screen.

All number combinations from 0000 to 9999 are valid
numbers.

“

The General menu reappears with a message confirming
that the PIN has been created.

&

Select 

in the General menu.

é

Press OK.

“

Press the cursor right.

‘

Enter the overriding pin 0-7-1-1.

(

Press the cursor again and enter a new personal 4-digit pin.

The previous pin is erased and the new pin is stored.

This menu allows you to select the accessory device you
connected to one of the AV inputs.

&

Select 

with the cursor right.

é

Press the cursor down to select one of the AV inputs.

“

Press the cursor right to enter the list of types of
accessory devices attached to the selected input.

‘

Select the accessory device with the cursor up/down.

Once you have selected the source, e.g.VCR, this source
will automatically be selected when your remote control is
in VCR mode, see p. 5, and you press the 

button on the remote control.

1009.4 gb  08-07-2002  11:06  Pagina 11