Справочник Пользователя для Harrington Hoists EDCK2

 

 

 

 

 

2 of 4

 

EDOC0321, REV 00

9/28/05

 

2.4  Install the cushion rubber (from ED525) and stopper complete set (from ED525) on the no-load side of 

the load chain. 

2.5  Install the appropriately sized chain container (Figure 43), for the load chain length using Socket Bolt BP 

(Figure 44), U nut (Figure 45) and Split Pin (Figure 46).  Refer to Owner’s Manual. 

2.6  Attach Nameplate B (Figure 47) to hoist as shown in Figure 1-1. 
2.7  Attach the Warning Seal E label, Figure 49, to hoist as shown in Figure 1-1. 
2.8  Attach Nameplate M, Figure 50, to hoist as shown in Figure 1-1. 

 
                      
 

           

Figure 1-1