Справочник Пользователя для Samsung DSR-1/1P

Chapter 3 Shooting

40

Chapter 3 Shooting

• Internal parts of the DSR-1/1P may become bent or otherwise

damaged if you attempt to close the cassette holder after inserting a
mini-size cassette in the wrong direction (such as with the cassette
turned backside front so the reel holes face the cassette holder
window or with the cassette turned sideways so that a short side
enters first).

• If 

 appears in the display window when the cassette is loaded, it

means that data has already been recorded into the cassette memory.
If you record under this condition whether the ClipLink function is
available or not, the existing cassette memory data will be
overwritten.  To avoid this, insert a new cassette.

• After inserting the cassette, close the cassette holder solidly by

pressing on the “PUSH” indication on the holder.  Unless the cassette
holder is closed solidly, the tape will not be loaded and the tape
operation buttons will not function.  If you find the tape operation
buttons inoperable, press on the “PUSH” indication again to make
sure that the cassette holder is solidly closed.

Make the switch settings shown in the figure below.

Do not insert cassette backside front.

Do not insert cassette sideways.

∞

-

TC mode switch 2: F-RUN or R-RUN

 b)

TC mode switch 1: PRESET

 b)

AUDIO SELECT
(CH-1/CH-2)
switches: AUTO

 a)

a) When this switch is set to MANUAL, the recording volume can be manually

adjusted. For details, see “Manually adjusting audio recording level” on page 42.

b) For details, see “Setting Time Code Value” on page 51.