Справочник Пользователя для Samsung DSR-1/1P

Chapter 4 Time Values

50

Chapter 4 Time Values

You can set the user bits as eight-digit hexadecimal
values (base 16) to have the date, time, scene number,
and other information inserted into the time code.
When using both the time code and user bits, set up the
user bits first. If you set the time code first, the internal
time code generator will remain stopped while you set
the user bits, which will set the time value off from the
original setting.

Setting the user bit value may be disallowed in some
cases at ClipLink shooting.  For details, see step 

 on

page 56 in Chapter 5 “ClipLink Shooting”

Set the DISPLAY switch to U-BIT.

The user bits indication appears.

Set the TC mode switch 1 to PRESET.

Set the TC mode switch 2 to SET.

This causes the leftmost digit in the user bits
indication to start blinking.

Set the user bits.

Hexadecimal digits A to F are displayed as
follows.

Perform step 

 in “Setting the Time Code Value”

on page 52.

Select a
digit

Press the SHIFT button.
Each time you press the SHIFT button,
the next digit to the right starts blinking.

Change a
value

Press the ADVANCE button.
Each time you press the ADVANCE
button, the displayed value is
incremented to F and returns to 0.

Reset

Press the RESET/(MENU SET) button.
The display returns to “00 00 00 00”.

∞

-

A

B

C

D

E

F

A

b

C

d

E

F