Справочник Пользователя для Panasonic VQT0F74
– 10 –
Controls and their functions
Front panel
(18) Number keys
≥
These are used to enter numbers.
(0 to 9)
≥
C
Clear key for clearing input data.
≥
ENT
For registering the data which have been entered.
≥
F
Used in combination with other keys.
≥
BS
Backspace key
≥s r
Keys for adding and subtracting
≥
FROM
≥
COPY
≥
T
≥
/
(19) INPUT CHECK
While these keys are kept depressed, the input signals can be checked.
It enables the video input signals to be checked at the SD SDI MONITOR OUT
connector or HD SDI MONITOR OUT connector and the audio input signals to be
checked at the MONITOR connector and headphone jack.
When the F7 (TCG OUT) key has been set to MOMNT on the TC/CHR SET UP
menu, the INPUT CHECK is established for the time code signals but only while
the INPUT CHECK key is held down. When the INPUT CHECK key is pressed
while the F7 key is set to LATCH, the INPUT CHECK mode is established, and
the mode remains established even when the key is released. The mode is re-
leased when one of the tape modes is established.
It enables the video input signals to be checked at the SD SDI MONITOR OUT
connector or HD SDI MONITOR OUT connector and the audio input signals to be
checked at the MONITOR connector and headphone jack.
When the F7 (TCG OUT) key has been set to MOMNT on the TC/CHR SET UP
menu, the INPUT CHECK is established for the time code signals but only while
the INPUT CHECK key is held down. When the INPUT CHECK key is pressed
while the F7 key is set to LATCH, the INPUT CHECK mode is established, and
the mode remains established even when the key is released. The mode is re-
leased when one of the tape modes is established.
(20) REMOTE button
≥
This is the switch for switching between operation from the front panel of the
unit and operation from the remote control terminals (RS-422A, RS-232C) at
the rear connector panel.
unit and operation from the remote control terminals (RS-422A, RS-232C) at
the rear connector panel.
≥
When REMOTE (lamp lit) is selected, the recorder can be controlled via the
remote control terminals at the rear connector panel.
remote control terminals at the rear connector panel.
≥
When LOCAL (lamp not lit) is selected, the recorder can be operated from the
front panel.
front panel.
(21) AUDIO LINE OUT
When the ADJUST control (23) is turned while this button is being pressed, the
output of all audio channels can be changed at the same time (HOME, AUDIO
OUT menus only).
output of all audio channels can be changed at the same time (HOME, AUDIO
OUT menus only).
(22) UNITY/VAR
This is used to switch between UNITY and VAR when the video output signals or
audio level is to be adjusted.
audio level is to be adjusted.
(23) ADJUST control
This is used to adjust the levels.
EJECT
SD
HD
CHANNEL CONDITION
VIDEO
AUDIO
SERVO
HOME
ASSEM INSERT
MULTI
CUE
VIDEO
IN
F13
7
8
9
4
5
6
1
2
3
0
C
T
F
F12
F11
F10
F9
F8
F7
F6
F5
F4
F3
F2
F1
L
AUDIO MONITOR
UNITY
HEADPHONES
PULL
OPEN
OPEN
LEVEL
CURSOR
EXECUTE
PREROLL
ENTRY
REW
STOP
REC/EDIT
PLAY
REC INHIBIT
STAND BY
FF
REVIEW
PREVIEW
R
OUT
IN
OUT
AUDIO
LINE OUT
SHTL
JOG
VAR
INPUT CHECK
REMOTE
ADJUST
POWER
AUTO OFF
ON
OFF
UNITY
/VAR
TC/CHR
SET UP
TEST
DIAG
FROM
COPY
/
BS
ENT
AUDIO
PULL
OPEN
(18)
(23)
(22)
(21)
(19)
(20)